User Manual

CyberPower Remote Management System
35
Example 2:
To define the date as March 21, 2015
CyberPower > date yyyy 2015 mm 3 dd 21
Example 3:
To define the time as 13:45:12
CyberPower > date time 13:45:12
ntp
Description: Show and configure NTP server IP, NTP update interval time.
Option
Argument
Description
show
Display all NTP information for RMCARD
access
enable | disable
If enable was set, System will set date and time from
NTP server.
priip
<primary ntp server ip>
Set the IP address/domain name of primary NTP
servers
secip
<secondary ntp server ip>
Set the IP address/domain name of secondary NTP
servers
update
now | 1-8760
now－Choose Update right now to update
immediately.
1-8760－Set the frequency to update the date and
time from NTP server.
Example 1:
To enable NTP server define date and time of RMCARD
CyberPower > ntp access enable
Example 2:
To setup primary NTP server IP as “192.168.26.22”
CyberPower > ntp priip 192.168.26.22
Example 3:
To update time by NTP immediately
CyberPower > ntp update now
sys
Description: Show and configure identification of RMCARD, reset RMCARD.
Option
Argument
Description
show
Display all system information for RMCARD
name
<system name>
Set name of the equipment.
location
<system location>
Set the location of power equipment.