User Manual

CyberPower Remote Management System
41
tcpip6
Description: Show and configure status of IPv6 router control, IPv6 manual IP.
Option
Argument
Description
show
Display all IPv6 information for RMCARD
access
enable | disable
Enable or disable IPv6 service.
routerctrl
enable | disable
The IPv6 address is assigned through the method (Stateless
Address Autoconfiguration, Stateless DHCPv6 or Stateful
DHCPv6) which is decided by router setting.
manual
enable | disable
Enable or disable IPv6 manual ip.
ip
<manual IPv6 IP>
Set manual IPv6 ip.
Example 1:
To define IPv6 manual IP address then show the information of IPv6
CyberPower > tcpip6 manualip 2001:cdba:0:0:0:0:3257:9652 show
Access: Enable
Router Control: Enable
Manual: Enable
Manual IPv6 Address: [2001:cdba::3257:9652]
snmpv1
Description: Show and configure status of SNMPv1.
Option
Argument
Description
show
Display SNMPv1 status for RMCARD
access
enable | disable
Enable or disable SNMPv1.
snmpv3
Description: Show and configure status of SNMPv3.
Option
Argument
Description
show
Display SNMPv3 status for RMCARD
access
enable | disable
Enable or disable SNMPv3
web
Description: Show and configure web access type, http port and https port.
Option
Argument
Description
show
Display all web information for RMCARD
access
http | https | disable
http－Enable the access to http service.
https－Enable the access to https service.
disable－Disable web service