User Manual

CyberPower Remote Management System
47
Method 2: Using Upgrade and Configuration Utility tool (Bulk firmware upgrade tool)
1. Install the CyberPower Upgrade and Configuration Utility tool available for download on the Network
Power Management product web page at www.CyberPower.com.
2. After installation completes, run the “Upgrade and Configuration Utility”.
3. The main dialog of the Upgrade and Configuration Utility tool program is shown in Figure 6. The
configuration tool will display all CyberPower Remote Management devices present on the same
network subnet. The "Discover" button is used to search the local network subnet again.
Note: You can click “View” to select the items you want to view.
Figure 6. The main window of the “Upgrade and Configuration Utility” program.
4. Check the boxes to select the devices you wish to upgrade, and select “Update” on the right to update
the device user account and password. Once the update is confirmed the status circle will change
from orange to green.
Note: You must update the device user account and password credentials before firmware
upgrade.
5. Select the devices you wish to upgrade by checking their respective checkbox and select “Upgrade
Firmware”.
Note: You can upgrade the firmware of multiple devices that use the same firmware files (Bulk
firmware upgrade).