User Manual Power Distribution Unit 4241 12th Ave E #400, Shakopee, MN 55379 1-877-297-6937 www.CPSww.
Table of Contents Model List ......................................................1 PDU Naming Convention ............................. 1 Package Contents ........................................ 2 Safety Precautions ....................................... 2 Installation .................................................... 3 Horizontal Installation ....................... 3 Vertical Installation with Brackets ... 4 Vertical Installation Keyhole Mounts (0U models only) ...
Model List: Package Contents Basic Series: PDU20BHVT8R PDU20BHVT10R PDU20BHVT12R PDU20BHVIEC8R PDU20BHVIEC10R PDU20BHVIEC12R PDU20BHVIEC12Ra PDU30BT8F8R PDU30BT10F10R PDU30BHVT8R PDU30BHVT10R PDU30BHVT12R Basic Series (0U): PDU (1) Cord Retention Tray (1/2/3/4 pcs - varies by model) Mounting Brackets PDU10BVHVIEC16F PDU10BVHVIEC20F PDU20BVHVT16F PDU20BVHVT20F PDU20BVHVT24F PDU20BVHVT32F PDU20BVHVT38F PDU20BVHVIEC16F PDU20BVHVIEC20F PDU20BVHVIEC24F PDU20BVHVIEC32F PDU20BVHVIEC38F PDU30BVT14F PDU3
Installation Vertical Installation with Brackets Horizontal Installation (1U models only) Step 1 – Mounting bracket installation Step 1 – Mounting bracket installation Install the screws (M4 X 8) in holes diagonal from each other. Install the screws (M4 X 8) in holes diagonal from each other. Step 2 – PDU Mounting Step 2 – PDU Mounting Install the PDU using fasteners compatible with the rack.
Vertical Installation with Keyhole Mounts (0U Models) Electrical Installation Step 1 – Keyhole Mount installation Step 1 – Receptacle evaluation Ensure that the plug type of your PDU unit (e.g. NEMA 5-15P, NEMA 520P, NEMA L5-30P) matches the wall receptacle type that you are using. CAUTION!! PDU must be plugged into a three-wire, grounded wall receptacle only. The wall receptacle must also be connected to an appropriate branch circuit/main with fuse or circuit breaker protection.
Basic Series ( 1U 20A ) Basic Series ( 1U 30A ) Product Features Product Features Front View Front View Normal Type R R BANK1 BANK2 BANK1 A A A. Mounting Bracket B C A. Mounting Bracket Back View B. LED Indicators C. Front Bank 1 Outlets High Voltage Type Twist Type R BANK1 BANK2 A B A. Mounting Bracket A G B C A. Mounting Bracket B. Rear Outlets (IEC 320 C13) C. Rear Outlets (IEC 320 C19) D. Circuit Breaker D E F G B. LED Indicators Back View Normal Type E.
Basic Series ( 0U 10A ) Product Features Front View A B C E Basic Series ( 0U 20A ) Product Features Front View Back View A. AC Inlet (IEC 320 C14) B. Circuit Breaker C. External Site Ground D. Front Outlets E. Cord Retention Tray Screw Holes A A. Bracket Screw Hole B. Keyhole Mount Peg Screw Holes Back View A A B B C F B Twist Type: A. AC Power Cord B. Circuit Breaker C. External Site Ground D. Front Outlets E. Front Outlets F. Cord Retention Tray Screw Holes A. Bracket Screw Hole B.
Basic Series ( 0U 30A ) Product Features Front View A B F Front View A A B C E Product Features Back View A D Meter Series ( 0U 20A ) C Normal Type: A. AC Power Cord B. External Site Ground C. Circuit Breaker (Bank 1) D. Circuit Breaker (Bank 2) E. Cord Retention Tray Screw Holes F. Front Outlets(Bank1) G. Front Outlets(Bank2) D G B Normal Type: A A B B Twist Type: A. AC Power Cord B. Circuit Breaker G C. External Site Ground D. Front Outlets E . Meter Readout F . Front Outlets G .
Product Registration Metered Series (0U 30A) Product Features Front View Thank you for purchasing a CyberPower product. Prompt product registration entitles coverage under the Limited Warranty and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements. Back View A A A. AC Power Cord A B B. Bracket Screw Hole C.
What Are Some Things This Warranty Does Not Cover? 1. This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software. 2.
