Quick Start Guide for USB 2.0 4 Port Mobile Battery Powered Hub Model No. CP-H420MP This Battery Powered USB Hub makes the most of your notebook computer and workspace by increasing the number of available USB ports. The need for an AC Power Adapter is eliminated by Battery Power. There has never been a more convenient way for travelers and notebook users to utilize USB devices on the road.
Thank you for purchasing this Cyber Power product. To enjoy all the features and benefits of this Battery Powered Hub, please carefully read and follow all installation and operation instructions completely.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications - USB Battery Powered Hub . . . . . . . . .3 Specifications - Rechargeable Battery. . . . . . . . . . . . .4 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction USB (Universal Serial Bus) is currently the standard for most computers, notebooks and peripherals. The USB connections allow the user to easily connect multiple devices. Cyber Power's USB 2.0 4Port Mobile Battery Powered Hub (Model CP-H420MP) provides additional ports to connect up to 4 USB devices to a single USB port on your computer. Thanks to the innovative Battery Power design, it is unnecessary to use an AC Power Adapter.
System Requirements Any PC or Macintosh computer with an available USB port and USBcompliant operating system (Windows 98SE/ 2000/ ME/ XP, MacOS 8.6 or above, etc.) NOTE: To use this USB hub with Windows 98 operating system, please visit http://www.cyberpowersystems.com and download the appropriate software driver before installing this Hub. Package Contents This package includes: 1. 2. 3. 4. USB 2.0 4-Port Battery Powered Hub (Model CP-H420MP) 4 AAA Ni-MH Rechargeable Batteries 1.
Specifications - Battery Powered Hub 3
Specifications - Rechargeable Battery Note: Please charge before use. The batteries are delivered in an uncharged state.
Product Overview 5 5 3 2 1 7 4 4 6 Model CP-H420MP 5
Product Overview - continued 1) Power Indicator - Blue LED will illuminate when USB Hub is receiving power. 2) Battery Power Switch - Switch on battery power switch when extra power is needed for connected USB devices. This switch activates self-power mode. 3) Battery Discharge Indicator - Red LED will illuminate to indicate when the batteries are in use. If the batteries are fully discharged, the Red LED will not illuminate. 4) Downstream Ports - Connect your USB devices to these 4 ports.
Product Overview - continued 6) Battery Cover - Remove cover and insert four (4) rechargeable Ni-MH batteries that are included in the package in order to use your Hub under SelfPower mode. 7) AC Power Adapter Connection - An AC Power Adapter (Model: CPSA0526; Output: 5V DC 2.6Amp) (Sold separately. See enclosed coupon for details) may be used as an alternative to battery power when an AC wall outlet is available. Connect the USB Hub to the optional AC Power Adapter. It will operate in Self-Power mode.
First Use - Charge Batteries When using this Hub the first time, charge the Ni-MH batteries at least 6 hours. 1) Insert the included batteries (4) into the Hub. 2) Plug the USB connector into an unused USB port on your computer. 3) Make sure that the Battery Power Switch is in the OFF position and your computer is ON. Batteries will be fully charged in approximately 6 hours.
Installation This USB Hub is a plug-and-play device. Your computer will display the Add New Hardware Wizard after connecting the hub. The Add New Hardware Wizard will install the Cyber Power USB Hub automatically. It is not necessary to restart your computer after installation. To use this USB hub with Windows 98 operating system, please visit http://www.cyberpowersystems.com and download the appropriate software driver before installing this Hub.
Installation - continued Self-Powering the Hub: Using Battery Power: If the connected devices work properly, keep the Battery Power Switch OFF in order to conserve battery power! If the connected devices function erratically or require additional power, turn the Battery Power Switch ON to activate Self-Power mode. NOTE: Depending on the equipment being powered, your Mobile Battery Powered Hub's rechargeable Ni-MH battery have to be replaced or recharged at 3-5 hours of continuous use.
Appendix A Troubleshooting Problem Possible Cause Action Unit operates erratically. Static electricity may cause the Hub to behave erratically. Reset the Hub by disconnecting it from your computer. Wait five seconds, then reconnect. USB devices operate erratically or can't be powered on. Connected USB devices may require too much power for Bus-Powered operation. Set the Battery Power Switch to the ON position for Self-Power mode. Unit fails to provide battery power Batteries may need replacement.
Appendix B Radio & TV Interference Statement This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequence energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix C Lifetime Limited Warranty Cyber Power warrants this USB Hub (the Hub) (excluding rechargeable Ni-MH battery) to be free from defect in material or manufacture for its lifetime. If a defect results in product failure during its normal use, Cyber Power's sole responsibility is to repair or replace (at its sole option) the Hub. The foregoing Limited Warranty is the consumer's sole and exclusive remedy and excludes any incidental or consequential damages.
Appendix C - continued Cyber Power will inspect and examine the Hub. If the Hub is defective in material or workmanship, Cyber Power will repair or replace it and return it to you at Cyber Power's expense at the place you have indicated. Contact Information: Cyber Power Systems (USA), Inc. 5555 12th Avenue East, Suite 110 Shakopee, MN 55379 Toll free: (877) 297-6937 Cyber Power is the warrantor under this Limited Warranty. You may also visit Cyber Power on the Internet at www.cyberpowersystems.com.
CyberPower Systems (USA), Inc. 5555 12th Avenue East, Suite 110, Shakopee, MN 55379, U.S.A. TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937 E-mail: sales@cyberpowersystems.com Web: www.cyberpowersystems.com Entire contents copyright© 2004 CyberPower Systems, Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited.