Owners manual

CyberPower Remote Management System
21
[System->Security->Local Account] This page is used to configure the login account.
Information
Description
Administrator
The administrator can access full function, including enable/disable
the Viewer account.
Viewer
The viewer can access the read function but cannot control or change
any settings.
Manager IP
This IP setting is to set the allowable IP addresses.
Users who log in as Admin (Viewer) can access RMCARD web pages
if its IP Address is in one of Admin (Viewer) Manager IPs. If you want
to access RMCARD from any IP address, you can set one of them as
0.0.0.0 or 255.255.255.255.
Change Administrator account:
1. Enter User Name
2. Enter Current Password for Authentication
3. Set the Manager IP (optional)
4. Enter New Password
5. Enter Confirm Password
6. Click “Apply”
Change Viewer account:
1. Select “Allow Access” to enable the Viewer account
2. Enter the User Name
3. Set the Manager IP (optional)
4. Enter New Password
5. Enter Confirm Password
6. Click “Apply”
Note: Only one user at a time may login WEB interface to access the device.
[System->Security->RADIUS Configuration] After setting the proper RADIUS server, the Remote
Management Card can use user name and password that set on the RADIUS server to login.
Item
Definition
Server IP
The IP address of RADIUS server.
Shared Secret
The shared secret of Radius server.
Server Port
The UDP port used by the Radius server.
Test Setting
Using User Name and Password to authenticate with RADIUS server,
and save information of RADIUS server if authentication succeeded.
Skip Test
There are save information of the RADIUS server with no test.
[System->Security->LDAP Configuration] After setting the proper LDAP server, the Remote
Management Card can use user name and password that set on the LDAP server to login.