Owners manual

CyberPower Remote Management System
22
Item
Definition
LDAP Server
The IP address of LDAP server.
LDAP SSL
To communicate with LDAP server by LDAPS.
Port
The TCP port used by the LDAP(S) server.
Base DN
The Base DN of LDAP server.
Login Attribute
The Login Attribute of ldap user entry.(ex:cn or uid)
Type
The type of LDAP server (OPENLDAP or Active Directory).
AD Domain
The AD Domain of the Active Directory server.
Test Setting
Using User Name and Password to authenticate with LDAP server,
and save information of LDAP server if authentication succeeded.
Skip Test
There are save information of the LDAP server with no test.
[System->Security->Session Control] Set for security setting.
Item
Definition
Timeout
The period (in minutes) that the system waits before auto logging off
[System->Network Service->TCP/IPv4] Display the current TCP/IP settings and also provides the
function to obtain TCP/IP settings from the DHCP server.
Item
Definition
Current Configuration
Displays the current TCP/IP settings: IP address, subnet mask,
gateway, primary DNS server, and second DNS server.
Using DHCP
Select the “Enable DHCP” option and click “Apply” to get IP address,
Subnet Mask, and Gateway by DHCP. Select the “Obtain DNS
Address from DHCP” option and click “Apply” to get the IP of DNS
from the DHCP.
Manual
Enter the TCP/IP settings directly and click “Apply”.
[System->Network Service->TCP/IPv6] Display the current the IPv6 settings.
Item
Definition
IPv6 Interface
Displays the current IPv6 address.
IPv6 Gateway
Displays the current IPv6 gateway.
IPv6 Configuration
Access
Set the IPv6 service to either Enable or Disable.
Router Control
The IPv6 address is assigned through the method (Stateless Address
Auto-configuration, Stateless DHCPv6 or Stateful DHCPv6) which is
decided by router setting.
Manual
The IPv6 address is assigned by manual setting.
Manual IPv6 Address
Enter the IPv6 address directly and click “Apply” when the Manual box
is checked.