Owners manual

CyberPower Remote Management System
23
[System->Network Service->SNMPv1 Service] Allow users to select the NMS, defined by the IP
settings that can use the channel to control the system data access through SNMPv1 Service.
Item
Definition
SNMPv1 Service
Allow Access
Set the SNMP service to either Enable or Disable.
SNMPv1 Access Control
Community
The name used to access this community by a Network Management
System (NMS). The field must be 1 to 15 characters length.
IP Address
The IP address or IP address mask can be accessed by NMS. A
specific IP address allows access only by the NMS with the specified
IP Address. The 255 is regarded as the mask and the rules list as
follows:
• 192.168.20.255: Access only by an NMS on the 192.168.20
segment.
• 192.255.255.255: Access only by an NMS on the 192 segment.
• 0.0.0.0 (the default setting) or 255.255.255.255: Access by any
NMS on any segment.
Access Type
The allowable action for the NMS through the community and IP.
• Read Only: Gets at any time but cannot SETS.
• Write/Read: Gets at any time, SETs anytime unless someone is
logged in the Web interface.
• Forbidden: No GETS or SETS.
[System->Network Service->SNMPv3 Service] Allow users to enable/disable SNMPv3 service
and configure the parameters of accessing through SNMPv3 service.
Item
Definition
SNMPv3 Service
Allow Access
Set the SNMPv3 service to either Enable or Disable.
SNMPv3 Access Control
User Name
The name to identify SNMPv3 user. The field must be 1 to 31
characters length.
Authentication Password
The password used to generate the key used for authentication. The
field must be 16 to 31 characters length.
Privacy Password
The password used to generate the key used for encryption. The field
must be 16 to 31 characters length.
IP Address
The IP address or IP address mask can be accessed by NMS. A
specific IP address allows access only by the NMS with the specified
IP Address. The 255 is regarded as the mask and the rules list as
follows:
• 192.168.20.255: Access only by an NMS on the 192.168.20