Owners manual

CyberPower Remote Management System
29
Method 2: Using Upgrade and Configuration Utility tool (Bulk firmware upgrade tool)
1. Install the CyberPower Upgrade and Configuration Utility tool available for download on the
Network Power Management product web page at www.CyberPower.com.
2. After installation completes, run the “Upgrade and Configuration Utility”.
3. The main dialog of the Upgrade and Configuration Utility tool program is shown in Figure 5. The
configuration tool will display all CyberPower Remote Management devices present on the same
network subnet. The "Discover" button is used to search the local network subnet again.
Note: You can click “View” to select the items you want to view.
Figure 5. The main window of the “Upgrade and Configuration Utility” program.
4. Click the as to select the Remote Management Cards, and select “Update” on the right to
update devices account and password. Once the update confirmed, the will become . For
example, to update the account and password for the two Remote Management Cards, which
have MAC address of 00-0C-15-00-B9-4C and 00-0C-15-00-B9-5E individually, as shown in
Figure 5.
Note: You must update the devices account and password before firmware upgrade.
5. Click on the of devices you want to upgrade the firmware and select “Upgrade Firmware”.
Note: You can upgrade the firmware of more than one device which uses the same
firmware files (Bulk firmware upgrade).