User’s Manual BATTERY PACK (BPL48V75ART2U) CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.CPSww.
Content INTRODUCTION.................................................................................... 2 OVERVIEW .............................................................................................................................................. 2 UNPACKING ............................................................................................................................................. 2 FEATURES INCLUDE ................................................................................
Introduction Overview: The CyberPower external battery pack (BPL48V75ART2U) supports 75A polarized plugs, and is designed for variety of CyberPower UPS systems. When combining with the UPS, the battery pack provides extended runtime with a 48V DC external connection. Additional parallel-connected battery packs provides the UPS for a longer extended runtime operation.
Basic Operation Safety Precautions CAUTION! Before connecting the Battery Pack(s) to the UPS, completely turn off and unplug the main UPS from the wall receptacle. CAUTION! Do not disconnect the any Battery Packs when the UPS is turned on or plugged into a wall receptacle. CAUTION! Do not connect the battery pack into itself. CAUTION! Before replacing the fuse, make sure the ON/OFF switch on the back of the Battery Pack to the “OFF” position.
Electrical Installation Guide CAUTION: Before connecting the Battery Pack to the UPS, make sure the Circuit Breaker (ON/OFF switch) on the back of the Battery Pack to the “OFF” position. It is necessary to put two plugs into the corresponding sockets to avoid the fire risk of over-current. Step 1: Make sure the Circuit Breaker (ON/OFF switch) on the back of the Battery Pack to the “OFF” position. 1 Step 2: Connect the Battery Pack to the UPS.
Trouble Shooting Problem Possible Cause Solution The UPS LCD does not perform expected runtime. Do not set the UPS to recognize the battery pack(s). By pressing the display toggle to select functions. Then, set up the correct battery pack numbers. The default setting is 0. Batteries charged. Allow the battery pack to charge for 24 hours. Do not expect full runtime during this initial charge period. Specified battery pack models can use AC to shorten charge time. The battery pack does not work.
Customer Service If the battery pack requests further service, please refer to the following information: 1. Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379 or send us an e-mail message at claims@cpsww.com for instructions. 2. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment.
Suite 400, Shakopee, MN 55379, or send us an e-mail to tech@cyberpowersystems.com within TEN (10) days of the failure of the UPS. 3. When you contact CyberPower, identify the UPS by model number, serial number, provide the purchase date, and request Return Materials Authorization (RMA) information from CyberPower. 4. Pack and ship the UPS to CyberPower as instructed in your RMA. Show the RMA code on the shipping label or include it with the UPS.
any High Risk Activities. CYBERPOWER UPS. ANY SUCH USE IS IMPROPER AND IS A MISUSE OF A This 1 Year Limited Warranty is governed by the laws of the United States and the State of Minnesota, without reference to conflict of law principles. The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. Contact Information: Cyber Power Systems (USA), Inc., 4241 12th Ave E, Suite 400, Shakopee, MN 55379, (877) 297-6937 (toll free).
Conformance Approvals FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. WARNING!! This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
