Specifications

ManualsBrandsCyberResearch ManualsComputer equipmentCOMHP 7404

Communications

148

www.cyberresearch.com

Toll-Free Assistance: 1

800

341

2525

(

USA

)

Tel: 203

643

5000 Fax: 203

643

5001

Visit our website for detailed product information! Applications Engineers: Monday– Friday, 9:00AM – 5:00PM, U.S. Eastern Time • e-mail: info@cyberresearch.com

• Connects to any 10/100Base-T Ethernet

network by any port, or interconnects five

workstations that have Ethernet cards

• Any port uplinks to switches or hubs by

either straight-through or crossover cable

• Both full- and half-duplex flow control

• Automatically senses 10 or 100 Mbps speed

• DIN rail, panel, and stackable mounting

• RJ-45 Ethernet connectors

• Unregulated 10 ~ 30V

DC input power,

surge protected to 3,000V

• Power consumption: 2.4 watts

• Diagnostic LEDs indicate power status

and networking status

• Operating temperature from +14 to +158°F

(–10 to +70°C)

ADAM 6520

Four 10/100Base-T Ports + One Fiber-Optic Port5-Port 10/100Base-T Switch

Ordering Information: Visit www.cyberresearch.com for detailed information.

Easy-to-install Remote Ethernet Communications Modules (ideal for ADAM & CYMOD modules; see pp. 186~191)

#ADAM 6520 Remote 5-Port 10/100Base-T Ethernet Switch, 10~30VDC w/ 3,000VDC surge protect., full/half-duplex, RJ-45 Ethernet connectors...$125

#ADAM 6521 Remote 5-Port 10/100Base-T Ethernet Switch, 10~30V

DC w/ 3,000VDC surge protect., 4 RJ-45 Ethernet connectors, 1 fiber port........$295

#CBL 45703 Spare cable for ADAM modules, RJ-12 to DB-9M connectors ............................................................................................................$15

Put Ethernet on Mobile Vehicles or on Your Factory Floor

DIN-Mount

•

Unregulated 10~30V

Power

•

Wide Temp

Range

• Connects to both 10/ 100Base-T

and 100BaseFX networks

• Multimode fiber standards (core/clad):

50/125 or 62.5/ 125 µm; wavelength: 1300nm

• Fiber-optic port minimizes noise interference

and transmits up to 1.24 mi (2 km)

• Both full- and half-duplex flow control

• Automatically senses 10 or 100 Mbps speed

• DIN rail, panel, and stackable mounting

• Unregulated 10~ 30V

DC input power,

surge protected to 3,000V

• Power consumption: 3.5 watts

• Diagnostic LEDs indicate power status

and networking status

• Operating temperature from +14 to +149°F

(–10 to +65°C)

ADAM 6521

ADAM 6520

ADAM 6521

Suitable for production lines, inventory systems, & conveyor control.

Easily connect fiber-optic and copper-based Ethernet systems.

Power in

block

Top

Three RJ-45

Ethernet Ports

Top

Three RJ-45

Ethernet Ports

Two

RJ-45

Ethernet

ports

Power in

block

RJ-45

Ethernet

port

Fiber-Optic

port (SC)

(shown with

protective

cap in

place)

Built to continue working in harsh environments, our two new

industrial Ethernet switches for 10/100Base-T networks handle high

and low temperatures with ease. They are easily wired to any

unregulated voltage source between 10 and 30VDC: perfect for

control systems and vehicular applications. Both mount to standard

DIN rails, and have removable terminal strips for easy maintenance

of DC power connections. They automatically switch to match the

speeds of connected devices, and no crossover cables are needed.

ESW 205P (with 5 ports) & ESW 208P (8 ports) allow you to

add 100Base-T and 10/Base-T Ethernet devices almost anywhere,

communicating with each device or network at its own best speed.

Key features and specifications include:

•LEDs monitor network and power status.

• ESD Protection: 8kV contact discharge; 15kV air-gap discharge.

•Duplex: Full-duplex IEEE 802.3x with half-duplex

backpressure flow control.

•Store-&-Forward Architecture: allows both speeds

to be served at the same time.

• ESW 208P: 2.5" W x 4.3" H x 3.8"D (63.5 x 109 x 96.5 mm)

• ESW 205P: 1.3" W x 3.9" H x 3.1"D (33 x 99 x 79 mm)

ESW 208P & ESW 205P

DIN-Mount Industrial Ethernet Switches

Fully Functional up to 167°F

•

30V

•

–30°

75°C

Ordering Information: Visit cyberresearch.com /esw for more info.

#ESW 208P 8-port 10/100Mbps Ethernet Switch (8 x RJ-45 ports)...........$150

#ESW 205P 5-port 10/100Mbps Ethernet Switch

(5 x RJ-45 ports).............$95

#CBL C6T007 7-foot Cat-6 Patch Cable

(RJ-45M connectors) .........................$15

#CBL C6T005 5-foot Cat-6 Patch Cable

(RJ-45M connectors) .........................$13

ESW 205P

5-port Industrial

Ethernet Switch

5 ports for 10/100Base-T Ethernet;

removable terminals for 10~30VDC

power on bottom of unit.

ESW 208P

8-port Industrial

Ethernet Switch

8 ports for 10/100Base-T Ethernet;

removable terminals for 10~30VDC

power on front of unit.

Quantities of a Single Item Per Shipment –

Call for Details

QUANTITY DISCOUNTS:1

4/LIST 5

9/5% 10

24/10% 25+/CALL

148-149.04* 10/19/08 2:49 PM Page 1

Summary of content (13 pages)

PAGE 1
48-149.04* 10/19/08 2:49 PM Page 1 Communications Put Ethernet on Mobile Vehicles or on Your Factory Floor DIN-Mount • Unregulated 10~30VDC Power • Wide Temp.
PAGE 2
148-149.04* 10/19/08 2:28 PM Page 2 Communications Ring-Redundant Ethernet Switches Work Around Line Breaks How do Ring Ethernet Switches Work? Ethernet is an excellent long-distance and high-speed communication protocol, but cable breaks in conventional networks cut off contact with downstream devices. Our intelligent ring-redundant Ethernet switches work around such breaks by detecting them and rerouting relevant signals to the other leg of the ring, as shown in the diagrams below.
PAGE 3
150-151.05* 10/19/08 2:07 PM Page 1 Communications Bring Ethernet and USB Power to Serial Networks Many factory-floor networks were designed and built when serial protocols such as RS-232/422/485/530 were the only practical choices. Now CyberResearch has expanded our shopfloor-tough series of remote CYMOD modules so that you can take advantage of the power and flexibility of USB ports and Ethernet communications without redesigning your network.
PAGE 4
150-151.05* 10/19/08 1:54 PM Page 2 Communications Convert Ethernet to Serial Signals 10 / 100-BaseT Ethernet port Activity LEDs DB-9M serial port Reed relay output Optically isolated input 9~30VDC input Reset button 1-port model adds a digital input and a relay, and runs on 9~30VDC A variety of other USB converters are covered on pages 151~152 and 158. Please visit our website for more detailed information about these and other products.
PAGE 5
152-153.03* 10/19/08 1:44 PM Page 1 Communications Control 8 or More Serial Devices from One USB Port! Serial port activity LEDs USBS 1000 Series: USB-to-Serial with Surge Protection USB 1.1 port DB-9 serial ports USBS 1204 DB-9 RS-232 ports Create Serial Ports Wherever You Need Them Our USBS 1000 and 2000 serial communication converters make it easy for computers with USB ports to communicate with serial-port devices. All of the classic serial protocols are covered.
PAGE 6
152-153.03* 10/19/08 1:35 PM Page 2 Communications PCI-Bus Serial Communications up to 460.8 kbps Most COMHP boards include either the 16550 UART (1- and 2-port boards) or 16554 (4- and 8-port models) standard, upgradeable to 16850 or 16950. Others come with either 16850 or 16854 UARTs. 16850 & 16854 UARTs feature a 128-byte data b u f f e r, w h i c h c a n increase the speed at which you can acquire data. A larger buffer makes it easier to program high-speed Windows® applications.
PAGE 7
154-155.
PAGE 8
154-155.04* 10/19/08 1:24 PM Page 2 Communications When You Just Need One More Serial Port... The original 32-bit, 5V PCI standard began as an improvement over the then-common ISA bus. Over time, a 64-bit, 3.3V version was developed, as were several enhanced standards that offer faster data throughput. Type I CompactFlash Card Rugged, permanently attached 12" cable DB-9M connector If slots and cards were keyed as 5V or as 3.3V, voltages and cards would always match.
PAGE 9
156-157.07* 10/18/08 4:21 PM Page 1 Communications Speeds to 18 Mbps with Autogating in Half-Duplex Mode! CYB 218MP COML 2232F 2-port RS-232 PC Card Isolated ground! CYB 2232C With autogating and speeds to 18 megabaud, our CYB 218MP card handles high-speed RS-422/485 requirements with ease. The only thing it doesn’t do is handle data rates below 115 kbaud! Our single- & dual-port PC Cards offer a 128-byte FIFO buffer on each input and output, at speeds to 921,600 baud.
PAGE 10
156-157.07* 10/18/08 4:13 PM Page 2 Communications PCI Serial Cards from CyberResearch: Up to 8 Ports, Autogating, Speeds to 921.6 KBPS, & FIFOs to 128 Bytes COML 8232U CYBD 4232P 8-port RS-232 card PCI (5V) bus 3.3V or 5V PCI bus 3.3V or 5V PCI bus 4-port RS-232 card CYB 3232U To service eight RS-232 devices with just a single slot, consider using our COML 8232U 8-port boards. Included OctaCable breaks out to eight DB-9M or DB-25M connectors to fulfill your application’s needs.
PAGE 11
158-159.03* 10/18/08 3:10 PM Page 1 Communications New Boards for GPIB / IEEE-488.2: Ideal for Instruments GPIB PXI Only $395 Low-profile backplate included GPIB PCIL Only $395 GPIB USB Only $445 3.3V or 5V PCI bus • Data transfer rates of 1.5 MB/s • 7 shared-interrupt lines • 1024-word FIFO buffer The GPIB IEEE-488.2 standard introduced “forgiving listening – precise talking.” This means that 488.
PAGE 12
158-159.03* 10/18/08 2:59 PM Page 2 Communications Cabling is a small part of the cost of your system, yet it’s the critical link which ensures data integrity. Why not get the best? Our premium cables cost less than others’ standard cables. GPIB/IEEE-488 Cabling M CyberResearch IEEE 40 Special-Ended GPIB Cables Flexible Outer Cover M CyberResearch IEEE 50 CyberResearch IEEE 60 Our IEEE 60 GPIB Extension Cables have a male connector on one end, and a female connector only on the other.
PAGE 13
160.03* 10/18/08 2:51 PM Page 1 Communications CardBus PC Card with Four USB 2.0/1.1 Ports COU 204C Fits Type II slot Four USB 2.0 / 1.1 ports DC Power Supply Included CardBus PC Card provides 500 mA on each of four USB 2.0/ 1.1 ports! Most CardBus PC Cards provide only two USB ports for your laptop. Now you can get twice as many USB 2.0 ports with our COU 204C card. It combines the ease o f 32-bit CardBus installation with the 480 Mbps speed of USB 2.0.