Displays MRAx Series MRAB 12: 12.1" TFT LCD Rack-Mount Monitor (800x600) MRAD 15: 15" TFT LCD Rack-Mount Monitor (1024x768) MRAE 18: 18.1" TFT LCD Rack-Mount Monitor (1280x1024) USER’S MANUAL VERSION 1.5 No part of this manual may be reproduced without permission. CyberResearch, Inc. www.cyberresearch.com 25 Business Park Drive, Branford, CT 06405 USA 203-483-8815 (9am to 5pm EST) FAX: 203-483-9024 ©1994 CBI ©1997 CyberResearch, Inc.
©Copyright CyberResearch, Inc. All Rights Reserved. Revision 1.5 The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of CyberResearch, Inc. In no event will CyberResearch, Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of or inability to use the product or documentation, even if advised of the possibility of such damages.
Contents Chapter 1 1.1 1.2 1.3 1.4 1.5 1.7 1.8 General Information . . . . Safety . . . . . . . . . . . . . . . . Packing List . . . . . . . . . . . Features of Display Panels General . . . . . . . . . . . . . . . Touchscreen (Optional) . . . Order Information . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 General Information 1. General Information 1.1. Safety Please read these safety instructions carefully and keep this user’s manual for future reference. Disconnect the display from any AC outlet before cleaning. Do not use liquid for cleaning; use a damp cloth. Keep the unit from high humidity. Place carefully on a sturdy, level surface when installing to avoid damage. Make sure that the voltage of the power source is correct before connecting the equipment to the power outlet.
Chapter 1 General Information 1.2. Packing List The LCD monitor comes with the following standard parts shown as below. Check and make sure they are included and in good condition. If anything is missing or damaged, please contact CyberResearch, Inc. immediately. 1. 2. 3. 4. Industrial Display Panel x 1 pc Industrial Display Panel Users Manual Disk x 1 pc AC to DC power adaptor x 1 pc VGA Cable 1.2 M x 1 pc With Touchscreen Option: 1. Touchscreen Manual x 1 pc 2. Touch Pen x 1 pc 3.
Chapter 1 General Information 1.3. Features of Display Panels This menu provides full ranging analog interface LCD panels, which are 12.1" (SVGA), 15”(XGA) and 18.1" (SXGA) high-bright, long lifetime TFT LCD monitors. 1.3.1. MRAB 12 n n n n n n n n n n n n n n n n Heavy-duty stainless steel chassis & NEMA 4/12 & IP 65 aluminum alloy front panel 12.
Chapter 1 General Information n n n n n n n n n n Uses standard VGA card 12VDC external power adapter High-bright 250 nits (250 cd / m2), Long-lifetime (25,000 hrs) 19" rack-mount panel Wall-mount: VESA 75 standard (optional) Desktop: VESA 75 standard (optional) Cable saddle Cable length: up to 20 meters Auto detect NTSC, PAL and Secam Adapter holder 1.3.3. MRAE 18 n n n n n n n n n n n n n n n n 4 Heavy-duty stainless steel chassis & NEMA 4/12 & IP 65 aluminum alloy front panel 18.
Chapter 1 General Information 1.4. General 1.4.1. MRAB 12 n Construction: Heavy-duty stainless steel chassis & aluminum alloy front panel n Dimension:339 (W) x 341 (H) x 230 (D) mm n Gross Weight: 7.5kg 1.4.2. MRAD 15 n Construction: Heavy-duty stainless steel chassis & aluminum alloy front panel n Dimension: 420 (W) x 300 (H) x 55 (D) mm n Gross Weight: 10.3kg 1.4.3. MRAE 18 n Construction: Heavy-duty stainless steel chassis & aluminum alloy front panel n Dimension: 450.
Chapter 1 General Information 1.5. Touchscreen (Optional) n n n n n n n 1.6. Environment n n n n n n n n 6 Type: 4/8-wire, analog resistive Resolution: Continuous Light Transmission: 72% (surface meets 4H, ASTM-D-336392A standard.) Operating Pressure : 30-45 grams for finger, 10 grams for stylus pen. Contact bounce< 10ms Controller: RS-232 interface Power Consumption: +5V @200mA OS Support: MS DOS, Windows 3.1, Windows 95, Windows 98, Windows NT.
Chapter 1 General Information 1.7. Order Information n n n n n n MRAB 12: With 12.1" SVGA color LCD display Includes: External power adapter and 1.2m VGA extension cable MRAB 12-T (optional touchscreen) MRAD 15: With 15" XGA color LCD display Includes: External power adapter and 1.2m VGA extension cable MRAD 15-T (optional touchscreen) MRAE 18: With 18" SXGA color LCD display Includes: External power adapter and 1.
Chapter 1 General Information 1.8. Dimensions Unit: mm 1.8.1. MRAB 12 1.8.2.
Chapter 1 General Information 1.8.3.
Chapter 1 General Information This page is intentionally left blank.
Chapter 2 Installation 2. Installation 2.1. Before Unpacking For optimal use, it is important to locate the LCD monitor in a suitable environment. n Place the LCD monitor on a stable, level surface, with good ventilation, and away from direct sunlight, excessive dust, dirt heat, water, moisture and vibration.
Chapter 2 Installation 2.2.
Chapter 2 Installation 2.3. Connecting Power To supply the LCD monitor with power, use the provided AC/DC adapter and the power cord to connect to the power output socket of the computer. Fasten the connections securely. Note: If your computer is not equipped with such a power output socket for the monitor, you may apply a power cord to connect to the provided AC/DC adapter and then plug it into the wall outlet. The plug should meet the electrical requirements of your country.
Chapter 2 Installation 2.4. 14 Connecting the Computer n Turn off the computer and the LCD monitor before connecting them. n Use the monitor-to-PC signal cable to connect the LCD monitor to the VGA port in your computer. The cable heads are the same on either side. n Fasten the connections securely.
Chapter 2 Installation 2.5. Desktop (Optional) Important Information 1. You can adjust the tightness of arm rotation by turning #4 knobs clockwise. 2. You can adjust the tightness of display rotation by turning # 11 hex set screws clockwise or counterclockwise by attached 3 mm hex key wrench. 3. Normally, you do not need adjust #14 knobs.
Chapter 2 Installation 2.6. Wall Mounting (Optional) Important information 1. You can adjust the tightness of monitor rotation by turning #11 set screws Clockwise or counterclockwise by the attached 3 mm hex key wrench. 2. Monitor tilt adjustment range is 45 degrees up or 25 degrees down. Adjust #16 hex screw using the attached hex keys to the best tilt friction when you first use your LCD arm. 3. The LCD monitor is portrait/landscape pivot adjustable to 360 degrees.
Chapter 2 Installation 2.7. Rack Mounting You can select different front panels for 19" rack mounting on 12.1”(MRAB 12) and 15” (MRAD 15) LCD panels.
Chapter 1 General Information This page is intentionally left blank.
Chapter 3 User Control User Controls 3.1. OSD Controller The LCD monitor is very simple to operate. There are five controls below the front panel: SOURCE MENU UP DOWN POWER SOURCE MENU UP DOWN POWER PC & Composite Video Input Source change select To scroll through items and locate them for adjustment in each page of the OSD menu, press the Select button. Menu To activate the OSD menu, press the MENU button.
Chapter 3 User Control 3.2. On Screen Display [OSD] There are eight options in the OSD menu. Press the MENU button to Choose the items you would like to adjust.
Chapter 3 User Control COLOR CONTROL: COLOR 1 COLOR 2 COLDR 3 USER EXIT COLOR1 : To set the color temperature of the image to 9300 K. COLOR2 : To set the color temperature of the image to 6500 K. COLOR3 : To set the color temperature of the image to 5000 K. USER: To set the RGB color of the image by user definition. EXIT: To return to the previous menu. EXIT (Under BASIC SETTING): To return to the previous menu.
Chapter 3 User Control PHASE H-SIZE H-POSITION V-POSITION EXIT 10 32 32 32 PHASE: To adjust the noise of the image. H-SIZE : To adjust the horizontal size of the image. H-POSITION: To adjust the horizontal position of the image. V-POSITION: To adjust the vertical position of the image. EXIT: To return to the previous menu. GRAPHIC/TEXT EXPANSION SMART SCALE EXIT GRAPHIC/TEXT : To exchange the 640x400 (60Hz) / 720x350 (60Hz). (Not for Windows OS).
Chapter 3 User Control AUTO ADJUST AUTO TRANCKING AUTO POSITION EXIT AUTO ADJUST: To auto tune the tracking & position. Please make use of this feature whenever the VGA input has been changed. AUTO TRACKING: To auto tune the H-SIZE & PHASE of the image. ATUO POSITION: To auto tune the horizontal & vertical position of the image. EXIT: To return to the previous menu.
Chapter 3 User Control To reset the monitor to the las tsaved value. To recover the BIOS default setting. To close the OSD and saving all setting values.
Appendix A Appendix A I. MRAB 12 Panel Type Size Brightness Backlight Lifetime Contrast Ratio Pixel Pitch Viewing Angle (Horizontal) Viewing Angle (Vertical) Resolution Display Modes Color Input Signal Compatibility Power Management Color TFT Diagonal 12.1" 250 nits (250 cd/m2) 25,000 hrs 250: 1 0.3075 (H) x 0.3075 (V) mm 1200 1000 800x600 Full Screen in 640x480, 800x600 mode 262K Analog RGB (0.
Appendix A II. MRAD 15 Panel Type Size Brightness Backlight Lifetime Contrast Ratio Pixel Pitch Viewing Angle (Horizontal) Viewing Angle (Vertical) Resolution Display Modes Color Input Signal Compatibility Power Management Color TFT Diagonal 15" 250 nits (250 cd/m2) 25,000 hrs 300:1 0.279(H) x 0.279(V) mm 1600 1600 1024x768 Full Screen in 640x480, 800x600, 1024x768 mode 262K Analog RGB (0.
Appendix A III. MRAE 18 Panel Type Size Brightness Backlight Lifetime Contrast Ratio Pixel Pitch Viewing Angle (Horizontal) Viewing Angle (Vertical) Resolution Display Modes Color Input Signal Compatibility Power Management Color TFT Diagonal 18.1" 235 nits (235 cd/m2) 25,000 hrs 300: 1 0.2805 (H) x 0.2805 (V) mm 1600 1600 1280x1024 Full Screen in 640x480, 800x600, 1024x768, 1280x1024 mode 16M Analog RGB (0.
Appendix A Standard Timing RGB Input Format: MODE TEXT VGA SVGA XGA MAC 28 Supported Analog RGB Input Formats Resolution Horizontal Vertical (KHz) (Hz) 640X350 31.469 70.087 720X350 31.469 70.087 720X400 31.469 70.087 640X400 31.469 70.087 640X350 37.861 85.08 720X350 37.861 85.08 720X400 37.861 85.08 640X400 37.927 85.039 640X400 24.828 56.40 640X480 31.468 59.94 640X480 37.861 72.809 640X480 37.5 75 640X480 43.269 85.008 640X480 45 90 800X600 35.156 56.26 800X600 37.879 60.317 800X600 48.077 72.
Appendix A Power Management System The LCD monitor complies with the power management regulations of VESA DPMS (version 1.0p). It is provided with two phases of power saving modes by detecting the horizontal or vertical synchronous signal. When the system is in the Power Saving mode or an incorrect timing is detected, the monitor screen will be blank and the power LED will flash orange. Status Power Consumption On – Working On – Standby 48 watts (max.
Appendix A Troubleshooting To solve the following problems, you may need to refer to Appendix A, Standard Timing for compatible display specifications. 30 • Problem: Unclear or Unsteady Display Actions: 1. Change to the Windows’s SHUT DOWN screen. 2. Activate the OSD menu. 3. Adjust the frequency setting to stabilize the display. 4. Adjust the phase setting to clarify the image. 5. You might need to repeat steps 3 and 4 to find balanced values for the best quality picture.
Appendix B Appendix B Exploded Diagrams I.
Appendix B II. III.
