User`s manual

Chapter 1 General Information
Industry Display Panel User’s Manual
1
1. General Information
1.1. Safety
Please read these safety instructions carefully and keep this user’s manual
for future reference.
Disconnect the display from any AC outlet before cleaning. Do not use
liquid for cleaning; use a damp cloth. Keep the unit from high humidity.
Place carefully on a sturdy, level surface when installing to avoid damage.
Make sure that the voltage of the power source is correct before connecting
the equipment to the power outlet.
Position the power cord to avoid steppping on or placing anything on it.
If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Do not open the equipment. For safe reasons, only qualified service personnel
should open the equipment.
Get the equipment checked by service personnel if: the power cord or plug is
damaged; liquid or moisture has penetrated the unit; it is not functioning properly
work according to the user’s manual; the unit has been dropped & damaged;
the unit has obvious signs of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE
60°C (140°F). IT MAY DAMAGE THE EQUIPMENT.