User`s manual

Installation

Operating System Installation

Windows 95/98/ME/NT/2000/XP

Do not install the Adapter in the machine until the software has been fully installed.

1. Start Windows.

2. Insert the CyberResearch, Inc. CD in to your CD drive.

3. If ‘Auto-Start’ is enabled for this drive the software will automatically launch. Otherwise, point your

browser to the ‘Index.htm’ on the root directory of the CD

4. Select ‘Install Software’.

5. Select the Part Number for your adapter from the listing.

6. Select ‘Windows 98/ME/2000/XP’. The setup file will automatically detect the operating environment and

install the proper components. Next (depending on the OS version) select the ‘Run this program from its

current location’ or ‘Open’ option. Follow the information presented on the screens that follow.

7. A screen may appear with the declaration: “The publisher cannot be determined due to the problems

below: Authenticode signature not found.” Please select the ‘Yes’ button and proceed with the installation.

This declaration simply means that the Operating System is not aware of the driver being loaded. It will not

cause any harm to your system.

8. During setup the user may specify installation directories and other preferred configurations. This program

also adds entries to the system registry that are necessary for specifying the operating parameters for each

driver. An uninstall option is also included to remove all registry/INI file entries from the system.

COML 106U(-X)-D25 CyberResearch

Serial Communications