User`s manual

CYMOD 4531

•

(Leading

Code)

Leading Code is the first character of the CYMOD

command. All CYMOD commands need a command

leading code, such as %,$,#,@,...etc.

1- character

(Addr) Module’s address ID, the value is in the range of 00 - FF

(Hexadecimal) if no specified in the following.

2- character

(Command

Variable)

Items indicate command codes or value of variables.

Variable length

[Data] Some output commands need data.

Variable length

[Checksum] Checksum in brackets indicates an optional parameter.

This field is required only if checksum is enabled.

2- character

< > Identifies a control code character, such as <CR> for

carriage return, its value is 0x0D. 1- character

Format of CYMOD Commands

(Leading Code)(Addr)(Command)[Data]<CR>

Example:

User

Command:

$012<CR>

Response: !01400600<CR>

$: LeadingCode

01: Address

2: Command (Read Configuration)

<CR>: Carriage return 0x0D