User`s manual

CYDAS UDR Library User’s Guide Digital Input/Output Boards - CYDIO 48
99
Receiving a request for control of an CYPDISO 16E
If your computer controls a CYPDISO 16E and you receive a message from another person requesting control
of the device, the message shows on your screen for the time the person set in the Maximum Wait drop-down
list.
 To disconnect and give control of the CYPDISO 16E to the person requesting, click on the Yes button.
 To retain control of the CYPDISO 16E, click on the
No button.
Receiving a message
When a computer sends a message to the computer controlling the device, the message displays on the
monitor of the controlling computer for the time specified by the
Time-out value.
The message box has two buttons used to respond to the message. When you receive a message, enter a
response in the message box and click on one of the following buttons.

Yes: Click on Yes to give up ownership/control over the network device.
The computer automatically disconnects from the network connection, and control over the device
transfers to the computer that sent the message. The
Device Owner property in InstaCal updates with the
name of the computer that gained control of the device.

No: Click on No when you do not agree to give up ownership or control over the network device.
When you click on a button, the message box and selected response displays on the computer that sent the
message.