User`s manual

CYDAS UDR Library User’s Guide Analog Input Boards - UMDAS 08JR8O
73
Analog output argument values
HighChan 1
Range UNI5VOLTS (0 to 5 V)
DataValue 0 to 1023
Digital I/O
Digital I/O functions and methods supported
UDR:
cbDOut(), cbDIn(), cbDBitIn(), cbDBitOut(), cbDConfigBit(),
cbDConfigPort()
UDR for .NET: DOut(), DIn(), DBitIn(), DBitOut(), DConfigBit(), DConfigPort()
Digital I/O argument values
PortNum AUXPORT*, FIRSTPORTA
DataValue 0 to 15 for AUXPORT, FIRSTPORTCL or FIRSTPORTCH
0 to 255 for
FIRSTPORTA or FIRSTPORTB
BitNum 0 to 3 for AUXPORT
0 to 23 for FIRSTPORTA
*AUXPORT is bitwise configurable for this board, and must be configured using
cbDConfigBit() or cbDConfigPort() (or the UDR Library for .NET methods
DConfigBit() or DConfigPort()) before use for output.
Counter I/O
Counter I/O functions and methods supported
UDR:
cbCIn()*, cbCIn32(), cbCLoad()**, cbCLoad32()**
UDR for .NET: CIn()*, CIn32(), CLoad()**, CLoad32()**
*Although cbCIn() and CIn() are valid for use with this counter, cbCIn32() or CIn32() may be more
appropriate. The values returned may be greater than the data types that are used by
cbCIn() and CIn() can
handle.
**
cbCLoad(), CLoad32(), CLoad() and CLoad32() only accept Count=0. These functions are used to reset the
counter.
Counter I/O argument values
CounterNum 1
Count
: 2
32
-1 when reading the counter.
LoadValue 0 when loading the counter.
cbCLoad()
and cbCLoad32() / CLoad() and CLoad32()are only used to reset the
counter for this board to 0. No other values are valid.
The “Basic signed integers” guidelines on page 93 apply when using cbCIn() or
CIn() for values greater than 32767, and when using cbCIn32() or CIn32() for
values greater than 2147483647.
RegNum: LOADREG1