User Manual

MM200-M MiniCard

3.2.2.2 EAP Authentication Modes

The MM200-M Configuration Utility currently supports the following EAP authentication modes:

. • 802.1x (TLS/PEAP)

. • WPA (TLS/PEAP/LEAP)

. • WPA2 (TLS/PEAP/LEAP)

. • CCX (LEAP)

3.2.2.2.1 WPA-PSK/WPA2-PSK SUPPORT

In Infrastructure mode, if WPA-PSK/WPA2-PSK is selected as the Authentication Mode, the encryption

method AES or TKIP can be selected.

Figure 13: Security selection

Figure 14: Security Tab—WPA-PSK/WPA2-PSK with TKIP

Enter the network passphrase into the Passphrase and Confirm boxes.

Note

WPA-PSK/WPA2-PSK is not supported in Ad-Hoc network mode.