User Manual

Appendix B Error Messages of Enabler Program
Table 13: Transmit Section Description
Field Description
Total Packet Reports the total number of packets transmitted
Unicast Packet
Reports the number of packets transmitted by the client
card that were destined
for a single network node
Multicast Packet
Reports the number of packets transmitted by the client
card that were destined
for more than one network node
Single Retries
Reports the number of packets that require one retry be-
fore the client card received an acknowledgement.
NOTE:After the client card sends a packet, it waits for an
acknowledge from the receiving radio to confirm that the
packet was successfully received. If the acknowledge is
not received within a specified period of time, the client
card retransmits the packet.
Multiple Retries
Reports the number of packets that require more than
one retry before the client
card received an acknowledgement
Failed Count
Reports the number of packets that were not successfully
transmitted because
the client card did not receive an acknowledge within the
specified period of time
RTS Success Reports the number of RTS attempts that were successful
RTS Failure
Reports the number of RTS attempts that were not suc-
cessful
ACK Error
Reports the number of unicast transmit attempts for which
no acknowledgement
was received
3.4.3 Receive Section
The Receive section displays the information on the packets received.
Figure 34: Receive Section
27