User Manual

MM200-M MiniCard

3.5.2 AdvancedTab—Miscellaneous

Figure 37: Miscellaneous Section

Table 16: Advanced Tab Miscellaneous Section Description

Field Description

Auto connect if link loss or no connection

(Use checked profiles in <Profile Man-

ager>)

Clear this check box to disable the auto-

configuration feature. Whenever there is a

link loss, auto-configuration tries to estab-

lish a connection to the checked profiles

in the Profile Manager window.

Boost Mode

Select this check box for performance

enhancement.

Enable WMM Select this check box to enable/disable

the Wireless Multimedia Enhancements

(WMM) feature.

Worldwide regulatory domain

Select this check box to set the regulatory

domain

3.6 AutoLink Tab

To enable AutoLink mode, proceed as follows:

1. Toggle the AutoLink button on the Access Point to enable AutoLink mode.

2. Toggle the AutoLink button on the client to enter AutoLink mode.

Figure 38: Access Point Autolink Button

Within 60 seconds, the AutoLink will be completed.