User Manual

MM200-M MiniCard
ʳ
Appendix A
Specifications
Model Number MM200-M
Product Type 802.11b/g Daughter Board
WLAN Interface(s) SDIO 1.0 (default) and Generic SPI
Main Chip(s) Marvell 88W8686
Mating connector Minicard connector (52 gold fingers)
WLAN Standard(s) IEEE 802.11b and 802.11g
WLAN Spreading IEEE 802.11g/b OFDM/DSSS PHY specification
WLAN Operating Frequency 2412~2484MHz ISM band
WLAN Number of Channels 11 (US), 13 (EU), 14 (Japan)
WLAN Data Rates 802.11g data rates of 6,9,12,18,24,36,48, 54Mbps
802.11b data rates of 1, 2, 5.5, and 11Mbps
WLAN Modulation Schemes 802.11g: 64QAM (54/48Mbps), 16QAM (36/24Mbps)
QPSK (18/12Mbps), BPSK (9/6Mbps)
802.11b: CCK (11/5.5Mbps), DQPSK (2Mbps) and
DBPSK (1Mbps)
WLAN Tx Power (typical)
+12.5dBm (11g and 11b modes) (for Ch14, +10dBm ,
11b mode)ʳ
WLAN Rx Sensitivity (typical)
-68dBm for 54Mbps @10% PER
-82dBm for 11Mbps @8% PER
Media Access Protocol CSMA/CA with ACK
Operating System Support WinCE 5.0, Windows Mobile 5.0, Linux 2.6.9 and
above, Windows XP, Windows Vista
Power Requirements
Standby mode current: 160mA
Power Saving Mode (DTIM=1): 6mA
TX mode: 265mA (continuous TX)
Rx mode: 200mA
Dimensions 30.0 × 30.0 × 3.0 mm (typical)
Regulatory Conformance (Test carried out by module
customers)
EMI: FCC Part 15b, Part 15c
Europe EN 301 489, EN 300 328
Safety : US : UL 60950-1
Europe : EN 60950-1, EN 50360-1 (SAR)
IEC60950-1
RoHS Compliance Yes
Normal Operating Temperatures
Functional* Temperature
*Operational with reduced performance
-10
o
C ~ +55
o
C
-30
o
C~ +70
o
C
33