User Manual

MM200-M MiniCard

Chapter 3

Using the Wireless Utility

This module also come with a wireless utility, following describe how to use the utility.

Configuration Utility for 802.11b/g

The Client Card Configuration Utility allows configuration of MM200-M high throughput client cards

through the following tabs:

•Network Status—displays the status of the network to which the user is connected. The Configura-

tion Utility initializes on this page.

•Profile Manager—displays the current profiles and allows the user to set attributes for network type,

security options, and protocols, as well as create/modify/delete profiles.

•Site Survey—displays site survey information.

•Statistics—displays the statistics of the current session.

•Advanced—used to set protocol parameters.

•AutoLink—to set AutoLink connection

•Admin—used to import and export profiles.

•About—provides the information for the driver version number, firmware version number, Configura-

tion Utility version number, and Medium Access Controller (MAC) address of the client card.

3.1 Network Status Tab

The Network Status tab displays the status of the network. When the Wireless client card Configuration Util-

ity initializes, it displays the Network Status tab.

Figure 2 :Network Status tab