User's Manual

NU361-HS
User Manual
CyberTAN Confidential 7 2015-04-01
3. PINOUTS AND SIGNAL DESCRIPTIONS
This section describes module signals and the associated pins.
3.1 Pin Definitions
Table 3: Pin Definition
No Definition Description Remark
1 BT_DEV_Wake(I) Host wake up BT device
Allows the SOC host to wake up to the BT
device
2 BT_Host_Wake(O) BT device wake up host
3 VCC +5V Voltage power
4 USBDM D-
5 USBDP D+
USB 2.0 Differential Pair
6 GND Ground
7 3D_SYNC Glass sync Connect Vsync
8 REG_ON Internal regulator on/off Connect reset pin
9 WIFI_DEV_wake WiFi device wake up host