User's Manual

Configuring Virtual Private Networks (VPNs) and Security
Configuring VPNs
Cisco RV 120W Administration Guide 104
5
The Wizard creates a corresponding VPN policy with the following default values:
Viewing the Default Values
You can also view the default values by choosing V
VPN
> I
IPsec
> D
Default Settings
.
Parameter Default value from Wizard
Exchange Mode Aggressive
ID Type FQDN
Local WAN ID wan_local.com
Remote WAN ID wan_remote.com
Encryption Algorithm 3DES
Authentication Algorithm SHA-1
Authentication Method Pre-shared Key
Key-Group DH-Group 2(1024 bit)
Life Time 24 hours
Parameter Default value from Wizard
Encryption Algorithm 3DES
Authentication Algorithm SHA-1
Life Time 8 hours
PFS Key Group DH-Group 2(1024 bit)
NETBIOS Enabled