User's Manual

Administering Your Cisco RV 120W
Configuring Simple Network Management (SNMP)
Cisco RV 120W Administration Guide 129
7
•
NoAuthNoPriv
—Doesn't require any Authentication and Privacy.
•
AuthNoPriv
—Submit only Authentication algorithm and password.
•
AuthPriv
—Submit Authentication/privacy algorithm and password.
STEP 3 If you chose A
AuthNoPriv
or A
AuthPriv
, choose the type of authentication algorithm
(M
MD5
or S
SHA
) and enter the authentication password.
If you chose A
AuthPriv
, choose the type of privacy algorithm (D
DES
or A
AES
) and enter
the privacy password.
STEP 4 Click S
Save
.
Adding SNMP Traps
The T
Traps List Table
lists IP addresses of SNMP agents to which the router will
send trap messages (notifications) and allows several operations on the SNMP
agents.
To add a new trap:
STEP 1 In the T
Traps List Table
, click A
Add
.
STEP 2 Enter the IP Address of the SNMP manager or trap agent.
STEP 3 Enter the SNMP trap port of the IP address to which the trap messages will be
sent.
STEP 4 Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
STEP 5 Choose the SNMP Version: v
v1
, v
v2c
, or v
v3
.
STEP 6 Click S
Save
.
Configuring Access Control Rules
The SNMP Access Control List is a table of access rules that enables read-only or
read-write access for select IP addresses in a defined SNMP agent's community.