User's Manual

Administering Your Cisco RV 120W
Configuring Logging
Cisco RV 120W Administration Guide 134
7
•
Respond to Identd from SMTP Server
—Check this radio box to configure
the router to respond to an IDENT request from the SMTP server.
• To confirm that the e-mail logs function is configured correctly, press T
Test
.
Send E-mail logs by Schedule
To receive e-mail logs according to a schedule, configure the appropriate
schedule settings:
•
Unit
—Select the period of time that you need to send the log: H
Hourly
, D
Daily
,
or W
Weekly
. To disable sending of logs, select N
Never
. This option is useful
when you do not want to receive logs by e-mail, but want to keep e-mail
options configured so that you can use the Send Log function from the
Status
> V
View Logs
pages.
•
Day
—If logs are to be sent on a weekly basis, choose the day of the week.
•
Time
—Select the time of day when logs should be sent.
Syslog Server
If you want the router to send logs to a Syslog server, enter the IP address or
Internet Name of the Syslog server in the S
Syslog Server
field. You can configure
up to 8 Syslog servers.
Configuring the Logging Type and Notification
There are a variety of events that can be captured and logged for review. These
logs can be sent to a server or e-mailed as configured. To configure, choose
Administration
> L
Logging
> L
Logs Facility
:
STEP 1 Select the type of functionality from which to generate logs: K
Kernel
, S
System
, or
Local0-wireless
.
STEP 2 Select the events to log: E
Emergency
, A
Alert
, C
Critical
, E
Error
, W
Warning
, N
Notification
,
Information
, D
Debugging
.
STEP 3 For each of these events, select how to receive notification: D
Display in Event Log
,
Send to Syslog
.
STEP 4 Click S
Save
.