User's Manual

Introduction
Connecting the Equipment
Cisco RV 110W Administration Guide 12
1
STEP 6 On the Cisco RV 110W, push in the ON/OFF POWER SWITCH button. The Setup
Wizard searches for the Cisco RV 110W.
The POWER LED on the front panel lights up green when the power adapter is
connected properly and the device is turned on.
Next:
• If your hardware connection is successful, but the Setup Wizard needs
more information about your Internet connection, the E
Enter Username and
Password
window appears. (See Entering Login and Internet Connection
Information, page 13.)
• If your hardware connection is successful and the Setup Wizard
successfully detects your Internet connection, the C
Configure Router
window displays. (See Configuring Security, page 14.)