User's Manual

Introduction
Connecting the Equipment
Cisco RV 110W Administration Guide 14
1
•
PPTP (Europe)
—Provide your account name (for example,
[e-mail] ), password, and server IP address. Click N
Next
after
entering the information.
•
L2TP (Europe)
—Provide your account name (for example,
[e-mail]), password, and server IP address. Click N
Next
after
entering the information.
STEP 5 The Setup Wizard configures your connection, verifies the router settings, and
checks the network connection. Click N
Next
.
STEP 6 To configure your home network, click N
Next
.
Configuring Security
STEP 1 Enter a new Cisco RV 110W administration password and click N
Next
. For security
reasons, you should not use the default password. Follow these password
guidelines:
• Passwords should not contain dictionary words from any language or the
default password.
• Passwords should contain a mix of letters (both upper- and lowercase),
numbers, and symbols.
• Passwords must be at least 8 but no more than 30 characters.
• Password security ratings are shown to the right of the password you enter,
and are rated from weak to secure. Cisco recommends using a password
rated as secure.
STEP 2 Enter a name (SSID) for your wireless network and click N
Next
. You should change
the default SSID to a unique name. The SSID is case-sensitive.
NOTE For added security, disable broadcasting of the SSID. You can disable SSID
broadcast using the Device Manager; see Editing an AP’s Properties, page 67.