User's Manual

Introduction
Viewing Device Statistics
Cisco RV 110W Administration Guide 28
1
- System logs are those that are a part of user-space applications (for
example, NTP, Session, DHCP).
- IPSec VPN logs are those related to ipsec negotiations. These are
related user space logs. Local0-Wireless are those related to wireless
connection and negotiation.
Click R
Refresh Logs
to view the entries added after the page was opened. Click
Clear Logs
to delete all entries in the log window.
Click S
Send Logs
to e-mail the log messages currently displayed in the log window.
Before clicking S
Send Log
, ensure that the e-mail address and server information
are configured on the A
Administration
> L
Logging
> R
Remote Logging
page.
Viewing Available LAN Hosts
This page shows available LAN hosts.
Viewing the Port Triggering Status
The Port Triggering Status page provides information on the ports that have been
opened per the port triggering configuration rules. The ports are opened
dynamically whenever traffic that matches the port triggering rules flows through
them. The table displays the following fields:
•
LAN IP Address
—Displays the LAN IP address of the device which caused
the ports to be opened.
•
Open Ports
—Displays the ports that have been opened so that traffic from
WAN destined to the LAN IP address can flow through the router.
•
Time Remaining Seconds
—This field displays the time for which the port
will remain open when there is no activity on that port. The time is reset
when there is activity on the port.
Click R
Refresh
to refresh the current page and obtain the latest statistics.
Viewing Port Statistics
This table displays the data transfer statistics for the Dedicated WAN, LAN, and
WLAN ports, including the duration for which they were enabled. The following
data is displayed: