FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Table for Filed Antenna Ant. Brand Part No. Antenna Type Connector Gain (dBi) Cable (dB) True Gain (dBi) Loss of 1 TONGDA T-543-2020003-2 Dipole Reversed SMA 5.00 0.70 4.30 2 TONGDA T-543-2020003-2 Dipole Reversed SMA 5.00 0.70 4.30 - - Printed N/A 4.32 - 4.32 Note: The EUT has three antennas (2TX, 2RX). This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module.