User's Manual

Broadband Wireless Router User Guide
- 21 -
access.
 Port Range Enter the range of port numbers which are used by the
applications you wish to be blocked.
Click “Apply” after making any changes.
4-3 Virtual Server Settings
The Virtual Server Settings application allows you to set up a maximum of ten public
services that can be accessed by external users of the Internet, such as a Web Address,
Email, FTP etc.. Each service is provided by a dedicated network computer (server)
configured with a fixed IP Address. Although the internal service addresses are not
directly accessible to the external user, the Advanced Wireless 11g Router is able to
identify the service requested by the service port number and redirects the request to
the appropriate internal IP Address/server. To use this application, it is recommended
you use a fixed Public IP Address from your ISP. Note that your Advanced Wireless
11g Router supports only one server of any particular type.
 Set up individual network computers to act as servers and configure each
with a fixed IP Address.
 In the “One Page Setup” screen, ensure the “Private IP Address” is set to
the Advanced Wireless 11g Router’s default setting of 192.168.1.1. If a fixed
Public IP Address is to be used, select “Specify an IP address” and enter the
IP Address and other necessary information provided by your ISP.
 Ports Enter the desired service port numbers in the “Ports” fields. You can
specify the protocol type as “TCP” or “UDP” from the drop-down list. If