User's Manual

Broadband Wireless Router User Guide
- 25 -
read-only.
 Login This column shows the login information of PPPoE or PPTP. You can
manually initiate the connection or make a disconnection by clicking the
appropriate buttons. Be aware that, if you make a disconnection here,
“Connect-on- demand” will not function until the connection button is
clicked. Note that “Login” won’t show any information if you selected
“Obtain IP automatically” or “Static IP” on the OnePage Setup page.
 Internet This section shows the IP settings status of the router as seen by
external users of the Internet. If you selected “Get IP Address
Automatically”, “PPPoE”, or “PPTP” in the OnePage Setup, the “ IP
Address”, “Subnet Mask”, “Default Gateway”, and “Domain Name
Server” (DNS) will show the information retrieved from the DHCP server
or ISP which is currently being used. If you selected “ Static IP” in “One
Page Setup: Public IP Address”, the information will be the same as your
input.
DHCP Release: Click this button to eliminate the IP address obtained from
the DHCP server.
DHCP Renew: Click this button to refresh the IP address from the DHCP
server.
Note that the “DHCP Release” and “DHCP Renew” button only show up
when you select “Get IP Address Automatically” in the OnePage Setup.
 Intranet This section displays the current “Private IP Address” and
“Subnet Mask” of the router, as seen by users of your internal network.