User's Manual

Broadband Wireless Router User Guide
- 27 -
In the above diagram, PC2 in LAN#2 is connected to the Advanced Wireless 11g
Router via another router while PC1 in LAN#1 is connected to the Advanced Wireless
11g Router directly. Without configuring the Static Routing function, the two PCs
would not be able to communicate with each other.
 Select Route entry Select the route entry number from 1 to 20 that you wish
to configure.
 Destination LAN IP and Subnet Mask Enter the IP Address and Subnet
Mask of the destination LAN that the immediate LAN is to communicate
with. Taking the above diagram as an example, enter 192.168.2.0 in the
“Destination LAN IP” field and 255.255.255.0 in the “Subnet Mask”
field.
 Default Gateway Enter the IP Address of the router that forwards data
packets to the destination LAN. For the above example, enter 192.168.1.2 in
the “Default Gateway” field.
 Hop Count Enter the number of hops required between the LANs to be
connected. The Hop Count represents the “cost” of the routing transmission.
The default value is 1.
 Interface Choose LAN if the Destination LAN is on your Router’s LAN