User's Manual

Broadband Wireless Router User Guide
- 28 -
side and choose WAN if the Destination LAN is on the Router’s WAN side.
Referring back to the above diagram, with the proper settings, PC1 would be able to
access LAN 1, LAN 2 and the Internet while PC2 can only access LAN 2, LAN1.
Click “Apply” after making any changes.
4-9 Log
The Log application provides the administrator with the ability to trace Internet
connection. With viewing the Log information, an administrator can send the record to
a specific LAN PCs to have the real time monitor.
 Access Log check the “Enable” option if you want to activate this function.
 Send Log To Enter the IP address of the PC that you wish to use to view the
Log information.
Click “Apply” after making any changes.
4-10 DDNS
“DDNS” is an acronym for Dynamic Domain Name Service. Whenerver you set up
the web servers, mail servers, or sometimes ftp servers,you need a “Domain Name”
to help Internet users reach your servers easily.
Internet actually runs on IP Addresses which are numerical order, for example
“66.37.215.53”. These IP Addresses identify the location of each device connected to
the Internet. However, the human brain does not easily remember this numbering
system, so a system that allocates a domain name such as “www.dyndns.org” provides
an easier method. If you type “66.37.215.53” or “www.dyndns.org” in the web
browser’s address bar, the browser will show the same web page. This is because both
methods relate to the same web server. The “Domain Name Servers” used to manage
the Internet will translate “www.dyndns.org
” into the IP Address “66.37.215.53” in
order to allow your browser to find the web server and display the correct web page in
your browser.
If your “WAN Connection Type”, as shown in One Page Setup section, is “Obtain IP