User's Manual

Broadband Wireless Router User Guide
- 29 -
Address Automatically”, “PPPoE”, or “PPTP” with dynamic IP address assigned by
ISP, it will cause an error when you set up the public computer servers in your LAN
side PCs. Internet users may not be able to reach your servers because your WAN side
IP address may change each time you initiate the connection to your ISP. The DDNS
function will help to map your IP address to your domain name when your ISP assigns
a new dynamic IP Address.
Note that this DDNS function acts as the client appliance of DDNS service and is only
able to be use in conjunction with the service provided by DynDNS.org. Before you
begin using this function, you will need to apply to DynDNS.org to be able to use the
service. Please visit www.dyndns.org for further information.
 DDNS Service check the “Enable” option if you wish to activate this
function.
 Username After you have applied for the DDNS service from DynDNS.org,
you will be issued with a Username. Enter this username in the “Username”
field.
 Password DynDNS.org, will also issue you with a password. Enter the
detail in the “Password” field.
 Host Name DynDNS.org, will provide you with a Host Name. Enter this
name in the “Host Name” field.
 Your IP Address This will display the IP Address currently assigned by
your ISP.
 Status This display the current status of the DDNS function.
Click “Apply”to save any changes you have made.