Owner`s manual

! WARNING: Always use proper lifting methods when moving heavy items.
11. Lift and move the unit
A. Lift and move or roll the unit using the front transport wheels to the location where you
intend to leave it. Use proper lifting methods.
12. Remove the top cap.
A. Remove the four long screws securing the top
cap in place. Remove top cover. See Figure 12.
13. Attach the Console Assembly.
A. Locate the console assembly (#2), four mounting
screws 5-16-18 x .75 (#9) and four washers 5-16
(#10). See Figure 13.
B. Locate the upper display cable and plug it into
the lower display cable in the main frame
assembly. See Figure 14.
C. Locate the upper ground cable and plug it into the
lower ground cable tab on the main frame
assembly. See Figure 14.
NOTE: Ensure cable connectors are securely fastened.
D. Lower the console assembly over the upper display cable and hold it steady in the correct
position on the base assembly. See Figure 15.
Setup
and Assembly
Page 5-10
Cybex Sigma-C and Sigma-R Owner’s Manual
Figure 12
#15
#4
Figure 14
Lower
Display
Cable
Upper
Display
Cable
Upper
Ground
Cable
Lower
Ground
Cable
Figure 13
#2
Upper
Display
Cable
Upper
Ground
Cable
#2
#9
#10