Owner`s manual

Assembly
and Setup
Page 2-1
Cybex 530S Owner’s Manual
2 - Assembly and Setup
All warnings listed in this chapter are as follows:
WARNING: Use extreme caution when assembling the unit. Failure to do so could result in injury.
WARNING: Always use proper lifting methods when moving heavy items.
WARNING: Be sure that all electrical requirements are met as indicated in the specifications at
the front of the manual and at the beginning of this chapter prior to proceeding.
WARNING: Wait until all moving parts come to a complete stop before dismounting.
Before assembling the unit you must select a suitable site and have the proper electrical outlet power
available for optimum operation and safety. See the Electrical Power Requirements section (located on
the next page) for direction in locating your voltage requirements.
The area you select for the unit should be well lit and well ventilated. Locate the unit on a structurally
sound and level surface. Allow enough clearance for safe access and passage during use of the unit.
Humidity - The unit is designed to function normally in an environment with a relative humidity range of
30% to 75%.
NOTE: Do not install or use the unit in an area of high humidity, such as in the vicinity of a steam room,
sauna, indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine
could adversely affect the electronics as well as other parts of the machine.
Temperature - The unit is designed to functionally normally in an environment with an ambient
temperature range of 50
o
F (10
o
C) to 104
o
F (40
o
C) degrees.
See Chapter 4 for information regarding storage of the unit.
Warnings
Choosing and Preparing a Site