Owner`s manual

Assembly

and Setup

Page 2-9

Cybex 530S Owner’s Manual

11. Level the unit.

A. Confirm that the unit is on a level surface. See steps 8B - 8D for leveling.

WARNING: Always use proper lifting methods when moving heavy items.

B. Carefully lay the stepper on its side to gain access to the leveling feet.

C. Locate the leveling feet at the rear of the unit. See Figure 12.

D. Using your hands, adjust the leveling feet up or down until the unit is level.

12. Connect the power cord.

A. Plug the power cord (#8) into the inlet near

the front of the unit. NOTE: Do not plug the

power cord into an outlet at this time. See

Figure 13.

13. Visually inspect the unit.

A. Carefully examine the unit to ensure that the

assembly is correct and complete.

B. Proceed to Testing the Operation section.

Figure 12

#16

Leveling

Feet

Figure 11

Figure 13