Service manual
Cybex 600T Treadmill Service Manual
7.
Remove the front roller.
A.
Loosen and remove the
two
bolts and four washers that fasten the front roller
to
the front end assembly. See Figure
6.
B.
Remove the drive belt from the drive pulley.
C. Lift and slide the roller out
of
the running belt.
Figure 6
8. Remove the running deck and running belt.
A.
Lift one side
of
the deck and
sl
id
e it out
of
the running belt.
B.
Look for the directional arrow inside the running belt. If the old arrow has rubbed
off, draw a new arrow pointing the direction
of
travel. See Figure 7.
Page
5-4
Figure 7
Running Belt Running Deck
j i
Front
Roller