Service manual

Cybex 600T Treadmill Service Manual
E-Stop
Port
CSAFE
Port
Contact Heart
Rate Port
Polar
Port
Figure 16
Heart Rate Board
Polar
Board
Front Sensor
Plate
Page 5-20
Tools Required
• Phillips head screwdriver
NOTE: This procedure will cover the heart rate board and handset board.
1. Turn
the power off.
A. Turn the main power switch in the front panel to the off (0) position.
B. Unplug the treadmill from the power outlet.
2. Remove the console back.
A. Remove the eleven Phillips head screws on the console back. Leave the top screw
which holds the accessory holder
in place. The top screw will keep the accessory
holder
in place on the console back. Set the console back and screws aside. See
Figure 15.