Service manual

Cybex 600T Treadmill Service Manual
3. Remove the display overlay(s).
A. Disconnect the switch membrane (upper and/or lower). See Figure 16.
B. Peel up a corner of the old display overlay and pull off the overlay(s).
4. Attach the display overlay(s).
A. Remove the paper backing from the new display overlay.
B. Carefully place the display overlay
in position within the indentation on the console
front.
C. Firmly rub the display overlay so that it adheres to the console.
5.
Attach the console back.
A. Attach the console cover with the eleven Phillips head screws on the console
back. See Figure 15.
6. Test
the new display overlay.
A.
Turn the main power switch in the front panel to the on (I) position.
B. Plug the treadmill into the power outlet.
C. Place the E-stop key in position if it is not already there.
D. Try each key to be sure that it functions properly.
-