Service manual

B. Remove upper side cover.
7. Attach the new upper side cover.
A. Place the new upper side cover (A) or (B) in
position. See Figure 4.
B. Using a Phillips screwdriver, tighten the
screw securing the new upper side cover.
8. Attach the top cover.
A. Place the top cover in position. See Figure 3.
B. Using a Phillips screwdriver, tighten the
screw securing the top cover.
9. Attach the front cover.
A. Place the front cover in position. See Figure 2.
B. Using a Phillips screwdriver, tighten the
four screws securing the front cover.
10. Test unit for proper operation.
Figure 4
Locking
Connectors
Upper Left
Side Cover
Screw
Cybex
®
and the Cybex logo are registered trademarks of Cybex International, Inc.
Arc Trainer
®
and its mark are registered trademarks of Cybex International, Inc.
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX [phone] • www.cybexinternational.com • [e-mail]
[e-mail] • Copyright © 2008, Cybex International, Inc. All rights reserved • 425A-508 A • March 2008