Service manual

Arc Trainer

425A Top Cover

Kit No. 425AK012

Installation Instructions

NOTE: This instruction sheet describes how to

replace the top cover in the Arc Trainer 425A.

Tools Required

• Phillips screwdriver

1. Read and understand all instructions

thoroughly before installing this kit.

2. Verify kit contents. See Figure 1.

B. Remove existing top cover.

4. Install new top cover.

A. Place the new top cover in position.

B. Using a Phillips screwdriver, attach the cover

using the three screws removed in step 3A.

C. Tighten screws securely.

5. Test the unit to verify proper operation.

Figure 1

Figure 2

3. Remove the top cover.

A. Using a Phillips screwdriver, remove the

three screws securing the top cover.

See Figure 2.

Top Cover,

425AK012

Screws

(3)

Top Cover

Cybex

and the Cybex logo are registered trademarks of Cybex International, Inc.

Arc Trainer

and its mark are registered trademarks of Cybex International, Inc.

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 • www.cybexinternational.com • techhelp@cybexintl.com