Service manual

D. Slide the pivot shaft through main frame
opening to remove input handles. See
Figure 3.
E. Set input handles aside. They will be
reattached later.
Figure 3
Right Input Handle
Left Input Handle
Pivot Shaft
Washer
Opening
Heart Rate
Cables
BHSCS/
Loctite
BHSCS/
Loctite
Washer
Grease
Loctite
Figure 4
Screws
(4)
Front
Cover
6. Remove the front cover.
A. Using a Phillips screwdriver, remove the four
screws securing the front cover. See Figure 4.
B. Remove top cover.
8. Remove upper side covers.
A. Using a Phillips screwdriver, remove the
screw securing each of the upper side covers.
See Figure 6.
Figure 5
Screw
B. Remove front cover.
7. Remove top cover.
A. Using a Phillips screwdriver, remove the
screw securing the top cover. See Figure 5.
Figure 6
Locking
Connectors
Upper Left
Side Cover
Screw
B. Remove upper side covers.
Top Cover
9. Remove lower side covers.
A. Using a Phillips screwdriver, remove the four
screws securing each of the lower side covers.
See Figure 7.
Figure 7
Screws
(4)
Lower Left
Side Cover
B. Remove both lower side covers.