Cybex Treadmill Product Number 625T Owner’s Manual Cardiovascular Systems Part Number LT-23221-4 B www.cybexintl.
Cybex Treadmill Product Number 625T Owner’s Manual Cardiovascular Systems Part Number LT-23221-4 B Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. Safety Sentry™ is a registered trademark of Cybex International, Inc. Polar® is a registered trademark of Polar Electro Inc. DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual.
Cybex 625T Treadmill Owner’s Manual Table of Contents FCC Compliance Information . . . . . . . . . . 7 Preventive Maintenance Warnings . . . . . . . . . . . . . . . . . . . . . . . . . Regular Maintenance Activities . . . . . . . . Cleaning Your Treadmill . . . . . . . . . . . . . . Running Belt Maintenance . . . . . . . . . . . . Other Preventive Maintenance . . . . . . . . Service Schedule . . . . . . . . . . . . . . . . . . . Safety Important Voltage Information . . . . . . . . . .
Cybex 625T Treadmill Owner’s Manual 6
Cybex 625T Treadmill Owner’s Manual FCC Compliance Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Cybex 625T Treadmill Owner’s Manual 8
Cybex 625T Treadmill Owner’s Manual Safety IMPORTANT: Read all instructions and warnings before using the treadmill. Important Voltage Information Before plugging the power cord into an electrical outlet, verify that the voltage requirements for the site match the voltage of the treadmill that has been received.
Cybex 625T Treadmill Owner’s Manual This treadmill is for use on a grounded, dedicated circuit. Make sure that the treadmill is connected to an outlet having the same configuration as the plug. Do not use a ground plug adapter to adapt the power cord to a non-grounded outlet.
Cybex 625T Treadmill Owner’s Manual Facility Safety Precautions • • • • • • • • • • • • • • • • • • • • • • • • • Instruct all users on how to clip the e-stop clip onto their clothing and carefully test it prior to using the treadmill. Instruct all users to use caution when mounting and dismounting the treadmill. Use a dedicated line when operating the treadmill. A dedicated line requires one circuit breaker per unit. Connect the treadmill to a properly grounded outlet only.
IN THIS DRAWING IS THE SOLE PROPERTY OF CYBEX. Cybex OR WHOLE WITHOUT CYBEX IS PROHIBITED. REVISIONS 625T Treadmill Owner’s Manual Carefully read and understand the following before using the 625T treadmill: • Warning Decals • Caution Decals REV DESCRIPTION ECO . See sheet 1 To replace any worn or damaged decals do one of the following: Visit www.cybexintl.com to shop for parts online, fax orders to 508-533-5183 or contact Cybex Customer Service at 888-462-9239.
Cybex 625T Treadmill Owner’s Manual DE-22765-4 Warning UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: .XX ± .02 .XXX ± .010 ANGULAR = ± 1° FINISH = 125 RMS FRACTIONS = ± 1/64” MATERIAL SEE NOTES, Page 1 FINISH SEE NOTES, Page 1 DO NOT SCALE DRAWING 13 ADOBE GENERATED DRAWING DO NOT MANUALLY UPDATE APPROVALS DRAWN BY BGarber CHECKED DATE LABEL, W 650T CON ENGLISH 7/20/10 RESP ENG MFG ENG QUAL ENG SIZE DWG. NO.
Cybex 625T Treadmill Owner’s Manual SOLE PROPERTY OF CYBEX. SOLE PROPERTY OF CYBEX. REV ECO . . Se . . . . . . REV ECO . . Se . . . . . . DE-22910 Warning, 115 VAC Artwork scaled to 80% See above artboard for actual size DE-23079 Warning, 230 VAC Artwork scaled to 80% See above artboard for actual size Do not print an outlin See Solidworks draw UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: FRACTIONS DECIMALS ANGLES ± .XX ± .02 ± 1 .XXX ± .
Cord Wrap Area Cybex 625T Treadmill Owner’s Manual WARNUNG UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: AVERTISSEMENT REV UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: .XX ± .02 .XXX ± .010 ANGULAR = ± 1° FINISH = 125 RMS FRACTIONS = ± 1/64” MATERIAL SEE NOTES, Page 1 FINISH SEE NOTES, Page 1 DO NOT SCALE DRAWING DESCRIPTION ECO .
Cybex 625T Treadmill Owner’s Manual Emergency Stop Key (e-stop) The e-stop key functions as an emergency stop. In an emergency situation, the e-stop key disengages from the console and the treadmill will come to a stop. Before using the treadmill, clip the e-stop key as described below. 1. C ompress the spring and clip the e-stop clamp to your clothing. Ensure the clip engages enough clothing so it does not fall off in an emergency situation.
Cybex 625T Treadmill Owner’s Manual The e-stop key can be removed to help prevent unauthorized use. Refer to the Stopping the Treadmill section in the Operation chapter for more information about the e-stop key. When not in use store the e-stop clip on the storage tab located on the lower cover. E-Stop Lower Cover Storage Tab Clip CSAFE Port The CSAFE standard defines a communication protocol and low-voltage DC power source specific to the Fitness Equipment Industry.
Cybex 625T Treadmill Owner’s Manual This page intentionally left blank.
Cybex 625T Treadmill Owner’s Manual Assembly and Setup Warnings/Cautions All warnings and cautions listed in this chapter are as follows: WARNING: Use extreme caution when assembling the treadmill. Failure to do so could result in injury. WARNING: Failure to correctly install power cord could result in serious injury or death. Ensure the power cord is routed as instructed and does not interfere with the full travel of the elevation system or become pinched by the elevation wheels or treadmill frame.
Cybex 625T Treadmill Owner’s Manual Electrical Power Requirements The power requirements for this treadmill are a grounded, dedicated circuit rated for one of the following: • • • • • • 100 VAC, 50/60 Hz, 20A 115 VAC, 60 Hz, 20A 208 VAC, 60 Hz, 15A 220 VAC, 60 Hz, 15A 230 VAC, 50 Hz, 13A, UK 240 VAC, 50 Hz, 15A Contact a qualified electrician to ensure the power supply complies with local building codes.
Cybex 625T Treadmill Owner’s Manual 2. Verify the following items are present. Check off ( 4 ) each item as you find it. If any of the parts are missing contact Cybex Customer Service.
Cybex 625T Treadmill Owner’s Manual 3. Check off ( 4 ) each item in the hardware pack as you find it. Item Qty 11 1 12 20 13 2 14 2 15 1 16 1 17 4 Part Number HS-21672 HS-22651 FM-22778 FM-22779 HX-00440 FS-23071 HX-21519 Description Screw, #8-32 x 1/2” Bolt, 3/8-16 .
Cybex 625T Treadmill Owner’s Manual CAUTION: A minimum of two people are required to lift, move and assemble this treadmill. Always use proper lifting methods when moving heavy items. Lift and move the treadmill. Take note of doorway widths in facility before assembly. The base is 32.5” (83 cm) wide. With uprights installed the width is 35.6” (90.5 cm). 1. At least two people should lift and move the treadmill to a level location where you intend to leave it. Use proper lifting methods.
Cybex 625T Treadmill Owner’s Manual Install power cord. 1. Locate the power cord. 2. Decide whether you will plug the power cord into a power outlet near the front of the treadmill or the back of the treadmill. Follow the corresponding routing procedure below. Do not plug the power cord into a power outlet at this time. WARNING: Failure to correctly install power cord could result in serious injury or death.
Cybex 625T Treadmill Owner’s Manual 4. Remove the right top step by inserting a long 3/8” drive socket extension into the right top step and prying backwards. 3/8” Drive Socket Extension Right Top Step 5. Remove the right top step. 6. Route the power cord through the hole in the upright support and behind the lower cover. Hole in Upright Support Power Cord Inlet Lower Cover Power Cord 7. Adjust the power cord length entering the frame to allow for the power cord to be plugged into the power cord inlet.
Cybex 625T Treadmill Owner’s Manual 3/8” Drive Socket Extension Right Top Step 10. Pry the long 3/8” drive socket extension forwards to secure the right top step. 11. Using a Phillips screwdriver, install the two screws securing the right end cap. Install the uprights. 1. Locate two standoffs short and long. 2. Using a 3/4” open end wrench, secure the standoffs short and long to the right side of the base. Front of Unit Short Long Base 3. Locate the right upright and two bolts.
Cybex 625T Treadmill Owner’s Manual 4. Hand thread two bolts into the base. Do not fully thread bolts into the base. 5. Carefully place the right upright onto the base assembly and the bolts installed in the previous step. 6. Hand thread four bolts into the right upright. Upright Bolt Bolt 7. Repeat steps for the left upright. Install the console assembly to the uprights. 1. Locate the console assembly and two bolts. 2. Hand thread one bolt, into the top back hole for each side of the console assembly.
Cybex 625T Treadmill Owner’s Manual 4. Insert the display cable into the top of the right upright until it exits the hole at the base of the right upright. Display Cable Enters Here Hole 5. Place the console assembly in position on the bolts installed in step 3 in the left and right uprights. 6. Hand thread six bolts, into the remaining holes of the right upright and left upright. Console Upright Bolt (Right side shown) 7. Using the 7/32” Allen wrench, fully tighten all of the bolts.
Cybex 625T Treadmill Owner’s Manual Connect the Display Cable. The display cable and CSAFE cable have the same connectors. The display cable is black, the CSAFE cable is red. Route the cables under all other cables and towards the base plate. 1. Plug the display cable, located at the bottom of the upright assembly into the communication port of the controller. Display Cable (Black) Controller Communication Port CSAFE Cable (Red) Install optional CSAFE cable.
Cybex 625T Treadmill Owner’s Manual 3. Plug the CSAFE cable into the CSAFE coupler on the front of the unit. Mounting Plate CSAFE Coupler CSAFE Cable (Red) Install shield. 1. Using a Philips screwdriver tighten the seven screws securing the shield to the base. Shield Screws (7) Attach the front covers. Perform steps 1 and 2 if you removed the front cover. If not, skip to step 3. 1. Locate the front cover and four screws removed on page 24. Screws (4) Front Cover 2.
Cybex 625T Treadmill Owner’s Manual Do not scratch top of hood cover. Place on carpeting or other soft surface. 4. Insert the four plastic connectors into the motor cover. Plastic Connectors (4) Motor Cover 5. Place the motor cover into position vertically by aligning the two tabs and four plastic connectors. Two plastic connectors are mounted in the front cover and two in the motor cover.
Cybex 625T Treadmill Owner’s Manual 2. Using a Phillips screwdriver, secure the power cord with the mounting bracket and mounting screw. Level the treadmill. 1. Confirm that the treadmill is on a level surface. Attach emergency stop key. 1. Confirm that the emergency stop key is in place in the bottom of the console handrail. The treadmill will not run without the key in place. Emergency Stop Key Console Handrail When not in use store the e-stop clip on the storage tab located under the console handrail.
Cybex 625T Treadmill Owner’s Manual Setup options Enter Opening Screen. 1. While in Dormant Mode, Press any key to access the Opening Screen. 2. Press and the hold the SCAN/HOLD and UP Navigate through the setup menu with the UP Press the ENTER and DOWN keys for 3 seconds. keys. key to save any changes. The Setup options are: Time Date Distance Units Weight Units Line Frequency Pause Default Time Max Time Max Speed Max Incline Beeper Dormant Style Set time display format.
Cybex 625T Treadmill Owner’s Manual WARNING: Be sure that all electrical requirements are met as indicated in the specifications at the front of the manual and at the beginning of this chapter prior to proceeding. Testing the Treadmill Operation Use the following instructions to test the full speed and incline range of the treadmill and to check the belt for proper operation. CAUTION: During this procedure STAY OFF THE RUNNING BELT! Stand with your feet on the two steps.
Cybex 625T Treadmill Owner’s Manual 12. Press the Stop key once to stop the running belt and enter Review Mode. Press the Stop key again to exit Review Mode and return the display to the opening screen.
Cybex 625T Treadmill Owner’s Manual This page intentionally left blank.
Cybex 625T Treadmill Owner’s Manual Operation Read and understand all instructions and warnings prior to using the treadmill. See all of the safety related information located in the Safety chapter. Terms Used This section lists some of the common terms and symbols used in this chapter. Other terms and symbols are listed in this chapter as appropriate. For setup options see Setup in the Assembly and Setup chapter. Dormant Mode — This occurs when the treadmill is powered up and not in use.
Cybex 625T Treadmill Owner’s Manual User Control Symbols Used % A/V Option Shown Control Control Name INCLINE UP Description Adjust Incline up. INCLINE DOWN Adjust Incline down. SPEED UP Adjust Speed up. SPEED DOWN Adjust Speed down. VOLUME UP (optional) Adjust Volume up. VOLUME DOWN (optional) Adjust Volume down.
Cybex 625T Treadmill Owner’s Manual Console Display Bar Graph Heart Rate Indicator Data Readouts Record Indicator Enunciator User Controls Incline Keys Incline Display Manual Key Quick Start Key Programs Key Speed Display Speed Keys % Volume Keys (optional) Scan/ Hold Key Stop Key Setup Key Enter Key Up/Down Keys TV LED (optional) Displays — Incline and Speed are shown in the LED displays. The TV LED indicates when Up/Down keys are active to change channels.
Cybex 625T Treadmill Owner’s Manual Quick Operation Guide Maximum user weight is 400 lbs. (181 kg). The following is a quick overview of the operation of the treadmill. For more information read Detailed Operation Guide in this chapter. 1. Place your feet on the two top steps located on each side of the running belt. WARNING: Do not stand on the running belt when starting the treadmill. Always place your feet on the two top steps when beginning a workout. 2.
Cybex 625T Treadmill Owner’s Manual 4. Clip the e-stop clip onto your clothing and carefully test the e-stop key to ensure it will activate in case of an emergency. See Emergency Stop Key (e-stop) in the Safety Chapter for properly testing the e-stop key. Also, see Stopping the Treadmill in this chapter for further information about the e-stop key. Be sure the string is free of knots and has enough slack for you to run comfortably with the e-stop key in place. 5.
Cybex 625T Treadmill Owner’s Manual 4. Upon entering the last setup option, The treadmill begins a countdown, “3...2...1” and sounds a tone for each count. When it reaches one (1) the treadmill gives a longer tone and then starts accelerating the belt. The running belt will begin accelerating and the incline will change to the corresponding speed and incline of the program and/or level you selected. 5. Hold the handrails while you step onto the running belt and begin walking. 6. Observe the control panel.
Cybex 625T Treadmill Owner’s Manual Stopping the Treadmill Press Stop once to end the workout session and start the Workout Review. The treadmill will perform a controlled belt stop and bring the incline to 0%. The Text Area will be displaying accumulated data or the results of the Fitness Test for the duration configured in Setup for Review Time. Press Stop again to exit to Dormant. The function of the immobilization method: The purpose of immobilizing the treadmill is to prevent unauthorized use.
Cybex 625T Treadmill Owner’s Manual Control During Operation Control keys are usable during operation and may be pressed at any time to make adjustments in speed, elevation or data readouts. The Speed and Incline keys are located near the hand grips, allowing for thumb adjustments without removing your hands from the hand grips. Changing Speed — Press the Speed + – keys to change the speed in increments of 0.1 mph or 0.1 kph. Minimum to maximum speed is from 0.5 - 12.4 mph (0.8 - 20.0 kph).
Cybex 625T Treadmill Owner’s Manual Displaying Heart Rate In order for the Cybex 625T to display your heart rate, hold the hand grips to use Contact Heart rate or wear a Polar® compatible heart rate chest strap. Contact Heart Rate — Hold the hand grips on the console handrail until a heart rate is displayed, typically less than thirty seconds. For best results, hold the hand grips lightly and ensure that your hands contact both the front and back sensors of each grip.
Cybex 625T Treadmill Owner’s Manual DRAWING IS THE SOLE PROPERTY OF CYBEX. LE WITHOUTHeart Rate Zone S PROHIBITED. Heart rate is described by the number of times your heart beats in a minute. At rest, the average adult will have a heart rate of about 72 beats per minute (BPM). As one begins to exercise, heart rate increases and continues to increase as exercise intensity or difficulty increases.
Cybex 625T Treadmill Owner’s Manual Preprogrammed Workouts WARNING: Obtain a medical exam before beginning any exercise program. Begin comfortably with a lower level and progress with higher levels as you become acclimated. With the 625T, you may choose from Quick Start, Manual Mode, nine program choices, Gerkin protocol and a one mile fitness test. Manual Choices: • • Quick Start Manual Mode Press Quick Start. Control speed and elevation. Set a goal, Time, Distance or Calorie. Enter weight.
Cybex 625T Treadmill Owner’s Manual This page intentionally left blank 48
Cybex 625T Treadmill Owner’s Manual Preventive Maintenance Warnings All warnings listed in this chapter are as follows: WARNING: To prevent electrical shock, be sure that power is shut off and the treadmill is unplugged from the electrical outlet before performing any cleaning or maintenance procedures. WARNING: Keep wet items away from inside parts of the treadmill. Electrical shock could occur even if the treadmill is unplugged.
Cybex 625T Treadmill Owner’s Manual As Needed — Vacuum any dust or dirt that might accumulate under or around the treadmill. Motors are especially susceptible to dust and dirt, and restricted airflow can prevent adequate cooling that could shorten motor life. Cleaning this area should be done as often as indicated in the Service Schedule. WARNING: Keep wet items away from inside parts of the treadmill. Electrical shock could occur even if the treadmill is unplugged.
Cybex 625T Treadmill Owner’s Manual Tension and Center the Belt — If the belt is slipping under each step perform this procedure: Tools Required • 3/4” Socket wrench Tension the belt. 1. Use a 3/4” socket wrench to turn each bolt 1/2 turn clockwise. Be sure to adjust each bolt equally on each side. 2. Press the Quick Start key. 3. Press the Speed + to bring the speed up to 3.5-4 mph (5.6-6.4 kph). Allow the treadmill to run for a minute. 4. Observe the belt to be sure it stays centered.
Cybex 625T Treadmill Owner’s Manual Center the belt. The lateral position of the running belt is correctly centered when the Cybex logo is centered between the inside edges of the two belt tracking slots. If the Cybex logo is not centered between the belt tracking slots, center the running belt with the following procedure. 1. With the treadmill running at 5 mph (8 kph) observe the Cybex logo position relative to the belt tracking slots.
Cybex 625T Treadmill Owner’s Manual Inspect the edges of the belt as described below. Tools Required • Phillips screwdriver Disconnect the external power source. 1. Turn the main power switch under the front end of the unit to the off (O) position. 2. Unplug the treadmill from the power outlet. Check the running belt condition. 1. Using a Phillips screwdriver, remove the two screws securing the right end cap. Right End Cap Screws (2) 2. Repeat step 1 for the left end cap. 3.
Cybex 625T Treadmill Owner’s Manual Static Electricity — Depending upon where you live, you may experience dry air, causing a common experience of static electricity. This may be especially true in the winter time. You may notice a static build-up just by walking across a carpet and then touching a metal object. The same can hold true while working out on your treadmill. You may experience a shock due to the buildup of static electricity on your body and the discharge path of the treadmill.
Cybex 625T Treadmill Owner’s Manual Every 5,000 miles (8,000 km). • Check running belt tension and tracking. • Vacuum the fan and heat sink area of the motor controller. • Move treadmill and vacuum underneath. • Raise elevation to 15%, carefully roll the treadmill backwards to clean underneath with a dry cloth and vacuum. Return to normal position when done. Every 15,000 miles (24,140 km). • Replace running belt and flip deck. • Check elevation assembly and replace worn parts.
Cybex 625T Treadmill Owner’s Manual This page intentionally left blank 56
Cybex 625T Treadmill Service Manual Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. Serial Numbers and Voltage The base serial number can be found on the rear of your treadmill.
Cybex 625T Treadmill Service Manual Return Material Authorization (RMA) The Return Material Authorization (RMA) system outlines the procedures to follow when returning material for replacement, repair, or credit. The system assures that returned materials are properly handled and analyzed. Perform the following procedures carefully. Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request an RMA from Cybex, if applicable.
Cybex 625T Treadmill Service Manual Ordering Parts Online www.cybexintl.com Fax 508-533-5183 Email parts@cybexintl.com Phone 888-462-9239 (for customers living within the USA) 508-533-4300 (for customers outside the USA) CAUTION Use only Cybex replacement parts when servicing. Failure to do so could result in personal injury. All inspections and repairs must be Cybex will void warranty if non-Cybex replacement parts performed by trained service are used. personnel only.
Cybex 625T Treadmill Service Manual This page intentionally left blank 60
Cybex 625T Treadmill Owner’s Manual Appendix A - Technical Specifications Specifications Length: Width: Running Area: Weight of Product: Shipping Weight Speed Range: Incline Range: Manual Mode: Programs: 82” (208.3 cm). 34” (86.4 cm). 22” x 60” (56 cm x 152 cm). 400 lbs. (181 kg). 440 lbs. (200 kg). 0.5 to 12.4 mph (0.8 to 20.0 kph) in 0.1 mph or 0.1 kph increments. 0 to 15% grade. Yes. Quick Start, Manual, and 9 standard programs with user orientated goal (Time, Distance or Calories).
Cybex 625T Treadmill Owner’s Manual This page intentionally left blank 62
