Owner`s manual

Cybex 625T Treadmill Owner’s Manual

Install power cord.

Locate the power cord.1.

Decide whether you will plug the power cord into a power outlet near the front of the treadmill 2.

or the back of the treadmill. Follow the corresponding routing procedure below. Do not plug the

power cord into a power outlet at this time.

WARNING: Failure to correctly install power cord could result in serious injury or death.

Ensure the power cord is routed as instructed and does not interfere with the

full travel of the elevation system or become pinched by the elevation wheels

or treadmill frame.

Front routing: Skip to page 26.

Back routing:

Remove front cover.

Using a Philips screwdriver remove the four screws securing the front cover to the base.

Screws (4)

Front Cover

Remove front cover.2.

Using a Phillips screwdriver, remove the two screws securing the right end cap.3.

Right End

Cap

Screws (2)