Owner`s manual

Cybex 625T Treadmill Owner’s Manual
31
Do not scratch top of hood cover. Place on carpeting or other soft surface.
Insert the four plastic connectors into the motor cover.4.
Plastic
Connectors (4)
Motor Cover
Place the motor cover into position vertically by aligning the two tabs and four plastic 5.
connectors. Two plastic connectors are mounted in the front cover and two in the motor cover.
Plastic
Connectors (4)
Motor
Cover
Tabs (2)
If motor cover top does not t properly, loosen the side screws on the front cover as needed.
Using a Phillips screwdriver, nish tightening the four front cover screws. Be sure the screws
6.
are securing the motor cover’s tabs.
Install power cord.
Locate the power cord, mounting bracket and mounting screw.1.
Power Cord
Bracket
Screw