Service manual

Setting Operation Options
The 700T's Setup Mode allows you to configure the following features:
1. Memory Retention Mode
2. Metric/English Measurement Units
3. Programs On/Off Mode
4. Time Limits (in Manual Mode, only)
5. Pause On/Off Mode
6. Service Reminders
The description of each feature, as well as the procedure to access the Setup
Mode, is listed below:
NOTE: The Setup Mode can be accessed only while the treadmill is in the
Dormant Mode, i.e., the On/Off switch must be turned On (I) and
the treadmill belt must not be moving.
To enter the Setup Mode, press and hold the SHIFT key for three seconds. The
left and right display windows will illuminate. The left display window will show
the status of the Memory Retention Mode as either “on” or “oFF.” The right
display window will show the status of the measurement units, “E” for English
or “nn” for metric.
To advance to the Program On/Off Mode, press the SHIFT key once after
entering the Setup Mode. The left display window will indicate the status of the
Program On/Off Mode as either “P on” or “PoFF.” If “PoFF” is selected, the
right display window will indicate the time limit setting in minutes.
To advance to the Pause On/Off Mode, press the SHIFT key once again. The
left display window will indicate the status of the Pause On/Off Mode as either
“on” or “oFF.” The right window will display, “PAUS.”
1. Memory Retention Mode
The Memory Retention Mode feature remembers the last program number,
program level and weight setting used.
Cybex 700T Treadmill Owner’s Manual
Page 5-11
Front Pages
3 Operation
Quick Operation Guide . . . . 3-1
Detailed Operation Guide . . 3-1
Stopping the Treadmill. . . . . 3-3
Control During Operation . . 3-4
Data Readouts. . . . . . . . . . . 3-5
Selecting Programs &
Options. . . . . . . . . . . . . . . 3-6
Displaying Heart Rate . . . . . 3-6
Use of Programs . . . . . . . . . 3-7
P1 - Manual Mode. . . . . . . . 3-7
P2 - Speed Challenge. . . . . 3-8
P3 - Cardiovascular
Program . . . . . . . . . . . . . 3-10
P4 - Weight Loss Program 3-12
P5 - Fitness Test Program. 3-14
P6 - Saved Program . . . . . 3-16
Workout Tips . . . . . . . . . . . 3-17
4 Preventive Maintenance
Regular Maintenance
Activities. . . . . . . . . . . . . . 4-1
Cleaning Your Treadmill. . . . 4-1
Running Belt Maintenance . 4-2
Other Preventive
Maintenance . . . . . . . . . . . 4-6
Service Schedule . . . . . . . . . 4-7
Log Sheet. . . . . . . . . . . . . . . 4-8
5 Setup & Assembly
Quick Setup . . . . . . . . . . . . 5-1
Choosing & Preparing a Site 5-1
Electrical Power
Requirements . . . . . . . . . . 5-3
Unpacking . . . . . . . . . . . . . . 5-3
Assembling the Treadmill . . . 5-4
Testing the 700T Operation. 5-9
Setting Operation Options. 5-10
6 Customer Service
Contacting Service. . . . . . . . 6-1
Serial Number & Voltage. . . . 6-1
Warranty. . . . . . . . . . . . . . . . 6-1
Return Material Authorization
(RMA) . . . . . . . . . . . . . . . . 6-4
Damaged Parts. . . . . . . . . . . 6-4
Ordering Parts . . . . . . . . . . . 6-5
7 Service
Service Instruction . . . . . . . . 7-1
Motor Brushes. . . . . . . . . . . 7-1
Motor Current & Voltage . . . 7-4
Running Belt & Deck. . . . . . 7-7
Drive Belt. . . . . . . . . . . . . . . 7-9
Front Roller . . . . . . . . . . . . . 7-9
Rear Roller. . . . . . . . . . . . . 7-10
Error Codes. . . . . . . . . . . . 7-11
Diagnostic Tests . . . . . . . . 7-14
Parts List . . . . . . . . . . . . . . 7-21
Exploded View . . . . . . . . . . 7-25
700T Schematic . . . . . . . . . 7-26