Service manual

Memory Retention On: When this feature is enabled (“on”), the 700T uses your last program
values as the new default program, level, and weight, replacing P1 and 160 lbs. (73 kg) as the
standard defaults. The memory retention feature is convenient, if you consistently use the
same program routine, because it allows you to quickly start the treadmill by simply pressing
START twice. The stored default values are automatically entered from the last workout.
Additionally, the Memory Retention Mode allows you to review your last program, program
level, maximum grade, maximum speed, calories burned (CAL) and DISTANCE run, by
pressing the SHIFT key when in the Dormant Mode.
Memory Retention Off: Setting the Memory Retention Mode feature to “oFF” resets the 700T
defaults to the standard values. The standard program default is P1 (Manual Mode) and the
standard default weight setting is 160 lbs. (73 kg). You can toggle the Memory Retention
mode “on” and “oFF” by using the v
^
keys.
2. Metric/English Measurement Units
This feature allows you to display speed, distance, and weight in either English or metric units
of measurement. You can toggle between the “E” for English or “nn” for metric by using the
- + keys.
3. Programs On/Off Mode
The programs on/off mode can be used to prevent or “lock out” the use of the 700T's
programs. When “P on” is selected, the programs are enabled and there is no time limit set.
The right display window will not be illuminated. When “PoFF” is selected the programs are
turned off and they are not available for use. The 700T can only be run manually. To toggle
between “P on” for programs on and “PoFF” for programs off, use the v
^
keys.
4. Time Limits (used in Manual Mode, only)
Time limits can be set on the use of the treadmill in the manual mode if the programs on/off
mode is set to “Poff.” The right display window will indicate the time limit setting, in five
minute increments, from 5 to 995. The number of minutes for the time limit setting can be
changed by using the - + keys.
NOTE: Time limits can only be set when programs are deactivated, “PoFF” in the
Programs On/Off Mode. Time limits can not be set when programs are activated,
“P on” in the Programs On/Off Mode.
5. Pause On/Off Mode
The pause on/off mode can be used to turn the pause function on or off. When “on” is
selected, the pause function is enabled for a pause time of five minutes. When “oFF” is
Cybex 700T Treadmill Owner’s Manual
Page 5-12