Owner`s manual

Cybex Owner’s Manual
28
8. Connect the console cable’s DIN connector to the power supply output. Make sure the two
connectors snap rmly together and can not be pulled apart without pulling the sleeve back to
release it.
3
1
2
Item Description
1 Power Supply Output
2 Console Cable DIN Connector
3 11 Power Cord
Install the front covers.
1. Install front right cover with three screws using a Phillips screwdriver.
1
3
2
Item Description
1 15 Screw, 8-16 x .50” (3)
2 16 Screw, 8-16 x .75” (1)
3 4 Front Right Cover
In addition to three mounting screws per front cover, there are ve plastic connectors that secure the
front covers together. Ensure that all four plastic connectors are inserted properly in each front cover.